Specifications
20
OSD MENU Description
1 2 3 4
80
5005
NETWORK SETU
P
IP MODE
NW ENABLE
VIDEO PORT
UPGARDE PORT
STATIC
PPPOE mode. Use and buttons to go up and
down and select
PPPOE
, and then press or to
make selection.
A message window will show up as below:
GET IP NOW! WAITING...
When DVR system get an IP address, the information will
display as below:
192.168.153.254
192.095.000.001
00.00.00.00.00.00
NETWORK INFORM
A
TION
IP ADDRESS
SUB NET
GATEWAY
DNS
MAC ADDRESS
CHANGE
000.000.000.000
000.000.000.000
NW ENABLE:
Allow internet remote user to playback or monitor the channels.
Without enabling the network function, the channels cannot be
playback or monitor from remote site.
i
1 is Channel 1 2 is Channel 2
3 is Channel 3 4 is Channel 4
Use and buttons to go up and down and select
NW
ENABLE
(network enable), and then press
or and
to move to the selection
. Use and buttons to
change the selections values and press
or to
confirm.
VIDEO PORT:
A port for the remote connection. Any port can be assigned as a
video port, except the ports already used by the network
services. The default video port is 80.
Use and buttons to go up and down and select
VIDEO PORT
, and then press
or and to move
to the selection
. Use and buttons to change the
selections values and press
or to confirm.
UPGRADE PORT:
A port for the remote update DVR system firmware. Any port can
be assigned as an upgrade port, except the ports are already
used by the network services. The default upgrade port is 5005.
For Upgrading DVR firmware, please contact your local dealer.