Specifications

17
OSD MENU Description
YES
H
A
RD
DR
I
V
E
S
E
T
U
P
OVERWRITE ENABLED
HDD SIZE 37 GB 78MB
HDD USED 0 GB 232MB 0%
HDD FORMAT
* HDD SIZE shows the total capacity of
the hard disk.
* HDD USED shows the amount of
space that has been used.
OVERWRITE ENABLED :
Enable/disable overwriting the earliest record when the hard disk
space runs out. By default, the HDD overwrite setting is enabled
HDD FORMAT :
For security purpose, you may have to enter the password to
format hard disk
To format hard disk:
1. Use the and buttons to go up and down and
select
HDD FORMAT
. Then press
or
2. In the
CHECK PASSWORD
screen, press or .
Then use the and buttons to select the security
combination number. Repeat till you key in the last number.
Also, user can use the number button on the remote control
to enter the password. Press or button again to
make the selection. To move the selection to the left and
right, use and buttons
CHECK PASSWORD
ENTER PASSWORD
3. After entering the last number, the system will format the
hard disk
4. It is done when the “HDD FORMAT COMPLETED” appears
YES
HDD FORMAT COMPLETE
H
ARD DRIVE SETUP
OVERWRITE ENABLED
HDD SIZE 37 GB 78MB
HDD USED 0 GB 232MB 0%
HDD FORMAT
Formatting the hard disk will permanently delete all the
records and can no longer be retrieved