User Guide

Using the BIOS Setup Utility —Advanced CMOS Setup
Field Setting Function
CD-ROM
USB FDD
IDE-0
1st Boot Device
2nd Boot Device
3rd Boot Device
1st Boot Device default is CD-ROM.
2nd Boot Device default is USB FDD.
3rd Boot Device default is IDE-0.
Disabled S.M.A.R.T. for Hard
Disks
Enabled
Only S.M.A.R.T. Hard Disks are
supported. The default is Enabled.
Off Bootup Num-Lock
On
Use this field to initially disable the
NumLock feature of the internal
keyboard when the notebook starts.
The default is Off.
Disabled Display Expansion
Support
Enabled
If you are using DOS or a 640 x 480
resolution to run windows, the display
will not fill the entire screen. Enable
this mode to expand the display to the
entire screen. The default is Enabled.
Setup The default value is Setup, which
specifies that a password is only
required to enter the setup utility.
Password Check
Always If Always is selected, the password is
required when the system is booted up
or resuming from a suspend-to-disk.
Share Memory Size 8MB This field displays the amount of
© 2003 AVERATEC, Inc.