User manual

31
System > SD Card > FileSearch
Use this to search the captured image in the SD card.
Application > Motion Detection
Both admin and operator levels can specify up to 3 areas on the screen to monitor the
motion. In the motion detection page, the frame will blink when the motion detected has
reached the percentage threshold setting. This feature can be utilized to trigger a response
in Event setting.
To Set the Motion Detection
1. Click Application > Motion Detection.
2. Enable the region check box to create a motion detection frame.
3. Move and adjust the frame to the area you want to detect the motion.
4. Adjust the sensitivity and percentage. Sensitivity detects the motion on the screen and