User manual

29
Name Function
(1) Stream Type aneous multiple streams of 2 or Select to transmit single or simult
3 videos.
(2) Codec Type Select the type of video compression codec.
(3) Resolution
Select the video size.
(4) Stream rate, bitrate and rate control On each stream, set the frame
setting.
VBR (Variable Bit Rate)
by default use this setting if there is a
need to maintain the image quality whenever there is lot of
activities on the scene or no motion. This setting keeps the video
stream constant as possible which increases the bandwidth
requirement when there is high motion and decreases when
ere is no motion. The bandwidth must be able to accommodate th
high throughputs.
CBR (Constant Bit Rate)
use this setting if there is bandwidth
concern. This setting is restricted to keep the bit rate setting. This
could affect the image quality and frame rate if there is high
activity that result in a bit rate that is higher than the set bit rate.
System > Audio
Both admi ter configuring
the Audi g.
n and operator levels can configure the IP camera audio setting. Af
o setting, click Save to apply the new setting and Cancel to keep the old settin
(4)
(1)
(2)
(3)