User manual

System > Network > Others
24
In Others tab, you can configure the enable/disable the UPnP setting. If your router does
not support UPnP function, you can enable the UPnP forwarding and set the port mapping.
System > Image
Both admin and operator levels can adjust the Image setting. There are 5 tabs: OSD,
Preference, Exposure, Advanced, and Privacy Mask.
System > Image > OSD
In OSD tab, you can enable/disable overlaying time stamp, text title and add logo. After
completing the setting, click Save to apply the new setting and Cancel to keep the old
setting.
(1)
(4)
(2)
(5)
(3)