User manual

22
Name Function
(3) Network Type Select the type of IP camera Network connection.
DHCP
– select this option to automatically obtain an IP add
from the DHCP server, whenever the IP camera is connecte
ress
d to
Discovery
camera network.
the network. You can use the IP camera UPnP
software in the CD to easily setup the IP
Static IP
– select this option to manually
to the IP camera.
assign a fix IP address
PPPoE
– select this option to access the IP camera anywhere
with Internet connection. To use this option, this requires an
account provided by the ISP. Set this setting while connected to
camera directly to DSL the LAN and click save. Connect the IP
or cable modem.
System > Network > Server
In Server tab, you can configure the Email, FTP, and NAS setting. It is necessary to
configure the server settings so that IP camera can perform the task in the Even
when a trigger is activated. You can configure either one or all of it. After completi
t setting
ng the
setting, click S ave to apply the new setting and Cancel to keep the old setting.