User manual

System > User Management > Connection

In Connection tab, admin can set the total number of user to access the IP camera, and

filter the IP address to allow or deny accessing the IP camera.

(2)

(1)

(4)

(3)

(5)

Name Function

Select the connection type. For higher security data

transmission level, select http & https or https only. This

authenticate and encrypted the data over the SSL(Secure

(1) Http Connection

Socket Layer).

Select the max number of user to simultaneously access the (2) Maximum Number of

Clients IP camera.

(3) Enable Filter list Select to turn the IP address filtering on/off.

(4) Filter Type Select to allow/deny the IP address in the filter list to access

the IP camera.

(5) Filter List Create and display the filtered IP address.

To Add Filter

1. Click Add Filter in User Management > Connection tab.

2. In Rule drop down list, select from the 3 types of rules:

Single, Network and Range.

Single

– add an IP address

Network

– assign a network address and the