User manual

17
System > General > Date & Time
In the Date & Time tab, admin can manually set the date and time setting or synchronize it
with the Internet time server or the computer date and time setting. This is used to record
the time whenever there is a significant occurrence listed in system log and is also used in
event scheduling. After completing the setting, click Save to apply the new setting and
Cancel to keep the old setting.
(2)
(1)
(3)
(4)
Name Function
(1) Current Date & Time Display the current date and time setting.
(2) Date Format Select the date display format.
(3) Time Zone Set the local time zone.
(4) Setting Method Select the date & time setting method.
Sync with current PC
– obtain the date and time setting on
the current login computer.
Sync with NTP Server
– obtain the date and time setting from
NTP server. In the drop-down list, select the NTP host name.
Manual
– manually set the date and time. Click Now to set
the date base on the computer time setting and Done to close
the date and time interface.