User manual

14
Name Function
ge. (1) Language
(2) Video screen
Select the browser interface langua
Change the video screen display.
Display the actual video pixel size.
Display the video screen in compact size.
Display the video on the entire screen. Press ESC to exit full
screen mode.
(3) Stream Switch to view the video stream type. The IP camera can send multiple
video streams of up to 3 types. To change the video stream setting, go
to System > Video Stream.
(4) Direction -
buttons
Use to move the position of the view point while in zoom mode.
- Use to control the position of the RS-485 pan tilt device
(5) Pan & P
button
atrol Pan - automatically move the view point from left to right when in zoom
in mode.
Patrol
- automatically move the view point around the preset locations
in Application > Patrol.
(6) Digital /RS-
485
ve
and you can use the
- Select Digital to control the IP camera ePTZ operation. This allows
you to closely view the target area without having to physically mo
the IP camera. The image will be zoomed in
direction control to pan the zoomed image.
- Select RS-485 to control the PTZ driver or scanner via RS-485
connection to I/O terminal block. The IP camera is mounted on an
RS-485 pan tilt device.
(7) Speed
Control
Set the speed when panning, tilting, or zooming.
(8) Zoom control
Reset zoom level.
Increase zoom level.
Decrease zoom level.
(9) Capture
Capture and save the image on the screen in *.bmp format.
(10) Record
Start/stop audio and video recording. The recorded video will be
saved in *.mp4 format.
(11) 2-way talk
Enable/disable mic from IP camera browser side.
(12) Mic
Enable/disable mic from the IP camera side.
(13) Sound
Enable/disable audio from the IP camera side.
(14) Volume
bar
Adjust the volume.