User`s manual

34
VII. Factory Default
1. Removing an Ethernet cable.
2. Plugging “a pink default cable” into “GND”.
3. Plug power cable.
4. When camera starts again, please remove the pink default cable and plug Ethernet cable for new setting.
5. Release the button when camera finishes proceed.
6. Re-login the camera using the default IP (http://192.168.1.200), and user name (admin), password
(admin).
VIII. Package contents
1. IP CAMERA Network Camera
2. Adaptor
3. Ethernet Cable
4. CD title (User manual, IP installation Utility)