User`s manual

18
automatically be detected and a new icon will be added to “My Network Places.”
[Note] UPnP must be enabled on your PC.
Please follow the procedure to activate UPnP.
1. Open the Control Panel from the Start Menu.
2. Select Add/Remove Programs.
3. Select Add/Remove Windows Components and open Networking Services section.
4. Click Details and select UPnP to setup the service.
5. The IP device icon will be added to “My Network Places”.
6. User may double click the IP device icon to access IE browser.
d. Rtsp Setting
The Real Time Streaming Protocol (RTSP) is a network control protocol designed for use in
entertainment and communications systems to control streaming media servers.
e. Multicast Setting (based on the Rtsp Server)
User can setup two streaming based on the Rtsp Server.
f. ONVIF
User can enable ONVIF standard and select the ONVIF version or disable it.
 PPPoE
 Select “Enabled” to use PPPoE.
 Enter the Username and Password for the ADSL connection.
 Send mail after dialed：When connect to the internet, it will send a mail to a specific mail account. For
the mail setting, please refer to “Mail and FTP” settings.