User`s manual

B. Network

 IP Setting: IP Camera supports DHCP and static IP.

a. IP Assignment

 DHCP: Using DHCP, IP Camera will get all the network parameters automatically.

 Static IP: Please type in IP address, subnet mask, gateway, and DNS manually.

 Port Assignment: user may need to assign different port to avoid conflict when setting up IP

assignment.

b. Port Assignment

 Web Page Port: setup web page connecting port and video transmitting port (Default: 80)

 RTSP Port: setup port for RTSP transmitting (Default: 554)

 RTP Start and End Port: in RTSP mode, you may use TCP and UDP for connecting. TCP

connection uses RTSP Port (554). UDP connection uses RTP Start and End Port.

c. UPnP

This IP camera supports UPnP, if this service is enabled on your computer, the camera will