User manual

5
ENGLISH
Name Function
(4)
(8)
(3)
(5)
(23)
(22)
(12)
(10)
(17)
(16)
(2)
(1)
(18)
(19)
(20)
(14)
(6)
(7)
(9)
(15)
(13)
(11)
(21)
(fig. 1.5)
camera, S-Video, or Video.
(13) Far/Near
Select to control either near site or far site
camera. The cam ctrl icon will appear on
the screen to indicate which site’s camera you
are controlling. The cam ctrl icon will disappear
after 5 sec.
The far site camera can only be
operated when this feature is enabled.
(14) Layout Change the screen layout.
(15) Back Return to previous OSD menu selection.
(16) Home Bring up the main screen.
(17) Hang Up End the call.
(18) 16:9/4:3 Toggle between 16:9 or 4:3 aspect ratios.
(19) Dual
Switch to dual screen mode. This splits the
video conferencing screen and present screen
onto two separate monitors (two monitors must
be connected to use this feature, one through
HDMI and one through VGA).
(20) *Snapshot
Capture the image from the camera. To view
the captured image, press Present or Image
Ctrl.
(21) *Image Ctrl
Switch between camera and image modes.
 Camera mode - allows you to pan, tilt, zoom
in/out, and adjust the focus.
 Image mode - allows you to display the
captured image. To save the captured
image in the USB flash drive, press Record.
(22) *Record
Start/Stop video recording. The video recording
can only be saved to a USB flash drive. You do
not need to be on a video conference to
record.
(23) Info Display the call statistics information.