User manual

4
ENGLISH
Remote Control
The remote control requires two (2) “AAA” size batteries (included). Make sure the batteries are
installed properly before using the remote. Aim the remote control at the AVer HVC camera
infrared sensor to operate the unit.
* Available in AVer HVC310 model only.
Name Function
(4)
(8)
(3)
(5)
(23)
(22)
(12)
(10)
(17)
(16)
(2)
(1)
(18)
(19)
(20)
(14)
(6)
(7)
(9)
(15)
(13)
(11)
(21)
(fig. 1.5)
(1) Call
Start a call or add another party.
(2) Phone Book

Search contacts to make a call.
 Add, edit, delete or create group contact
entries.
(3) Enter

Make a selection in OSD menus or on-screen
keyboard.
 Accept incoming calls.
 Display the site name and icon during the
meeting.
(4) ▲,▼,◄, &
►

Use these buttons to navigate through the
selections in OSD menus or on-screen
keyboard.
 Pan and tilt the camera to adjust the viewing
angle.
 Pan, tilt the zoomed in camera image or
captured image.
(5) Present
Share either content from the VGA IN port or
the latest captured image.
This present icon will appear on the screen
to indicate content sharing. The icon will
disappear after 5 sec.
(6) Vol +/-
Increase/decrease the speaker volume.
(7) Zoom +/-
Increase/decrease the camera zoom or the
captured image magnification.
(8) Mute
Mute/Unmute the MIC. This mute icon will
appear when the mic is muted. The mute icon
will become translucent after 5 sec.
(9) Preset

Press and hold for 3 sec to set the position of
the camera to a preset from 0-9.
 Press to move the camera to a selected
preset point number.
(10) Backspace
Move back one space and delete one
character at a time.
(11) Numeric Pad
Use to enter numeric numbers.
(12) Input
Switch the input source between AVer HVC