User manual

28
ENGLISH
LAN Configuration
1. Select LAN Configuration and press .
2. In Obtain IP Address selection, select the type
of IP and press .
 DHCP – configures the system to
automatically obtain an IP address from the
DHCP server.
 Static IP – configures the system to use the
assigned IP address. Select this when the
public IP address is available.
 Your IP address is - shows the current IP
address; enter info when you need to
configure your IP address manually.
 Subnet Mask - shows the designated IP
address routing prefix; enter info when the
system does not automatically obtain the
subnet mask.
 Default Gateway - allows traffic from one
point and exit point in network; enter info
when the system does not automatically
obtain the gateway.
3. Select Apply and press to save the setting.