ENGLISH Table of Contents Introduction ........................................................................................................................................... 1 Package Contents .................................................................................................................................. 1 Getting Familiar with the AVer HVC ........................................................................................................ 2 Main System ..........................
ENGLISH Enable/ Disable Administrator Settings .................................................................................... 24 Quick Start ..................................................................................................................................... 25 Setting up the AVer HVC ........................................................................................................... 26 Set the Language ............................................................................
ENGLISH Restore the System Settings ......................................................................................................... 56 Using the AVer HVC .......................................................................................................................... 57 Making a Call ................................................................................................................................. 58 Call using the Phonebook ..................................................
ENGLISH Introduction Thank you for choosing AVer video conferencing solutions. The HVC series is designed to provide HD video conferencing with all the features needed to see immediate benefits to online collaboration and communication. Package Contents Make sure the following items are in your HVC package.
ENGLISH Getting Familiar with the AVer HVC Main System (1) (2) (3) Main system front panel (fig. 1.1) Name Function (1) USB Ports Save captured images or record meetings on to a USB flash drive. (2) Network Status Displays network connection status. (3) Power Turn on/off main system. (1) (2) AUX MIC IN MIC IN (3) (4) OUT (5) (6) (7) VIDEO IN VGA IN (8) (9) (10) CAMERA IN (11) DC 19V (12) Main system back panel (fig. 1.
ENGLISH Name Function (11) CAMERA IN Connects the camera to the main system. (12) DC 19V Connects the power adapter to the system. MIC (1) UT MIC O MIC IN (fig. 1.3) (2) (3) Name Function (1) Mute Mute/Unmute the Mic. (2) MIC OUT Outputs audio signal from the MIC. (3) MIC IN Receives audio signal from the second MIC and passes it thru the MIC OUT to the main system. Camera (1) (2) (fig. 1.4) Name Function (1) IR Sensor Receives IR signal from the remote control for system operation.
ENGLISH Remote Control The remote control requires two (2) “AAA” size batteries (included). Make sure the batteries are installed properly before using the remote. Aim the remote control at the AVer HVC camera infrared sensor to operate the unit. * Available in AVer HVC310 model only. (21) (20) (19) (18) (17) (22) (23) (1 ) (2 ) (3 ) Name (1) Call (2) Phone Book (3) Enter (16) (4 ) (5 ) (15) (14) (6 ) (7 ) (8 ) (9 ) (13) (12) (4) ▲,▼,◄, & ► (11) (10) (fig. 1.
ENGLISH Name (21) (20) (19) (18) (17) (22) (23) (1 ) (2 ) (3 ) (13) Far/Near (16) Function camera, S-Video, or Video. Select to control either near site or far site camera. The cam ctrl icon will appear on the screen to indicate which site’s camera you are controlling. The cam ctrl icon will disappear after 5 sec. (4 ) (5 ) The far site camera can only be operated when this feature is enabled. (15) (14) (6 ) (7 ) (8 ) (9 ) (13) (12) (14) Layout Change the screen layout.
ENGLISH M a k i n g t h e C o n n e c t i o ns Before making the connections, make sure all devices are powered off. Refer to the illustrated connections below and also to the user manual of the device you are connecting to the AVer HVC system. Make sure all connections have been made before powering on the system. Connecting a Monitor Locate the VGA/HDMI input port of the graphics display device and connect it to VGA OUT/HDMI OUT port of the AVer HVC.
ENGLISH Connecting the MIC Use the supplied MIC cable and connect the end with the red tag to the MIC IN port of the HVC. Then connect the other end of the MIC cable with the blue tag to MIC OUT port. Press the button on top of AVer HVC Mic to mute/unmute the mic. MIC IN MIC OU T Mic cable AUX MIC IN OUT MIC IN VGA IN VIDEO IN CAMERA IN DC 19V Connecting the LAN Connect a RJ-45 cable from your it from the LAN port of AVer HVC to a RJ-45 wall jack or Ethernet hub. Requires an IP-based network.
ENGLISH Connecting a Computer Locate the VGA output port of the computer or laptop and connect it to VGA IN port of HVC. To share the video signal from the computer, press PRESENT and select “VGA”. Laptop VGA cable Desktop AUX MIC IN OUT MIC IN VGA IN VIDEO IN CAMERA IN DC 19V C o n n e c t i n g a DV D p l a y e r o r C a m c o r d e r Locate the S-VIDEO, VIDEO and AUDIO output port of the media player (i.e.
ENGLISH Connecting to a Centr al System via RS-232 Connect the 8-Pin adapter to the RS-232 port on the system. Then connect the other end to RS-232 port of the central system. For the command codes, visit our website or request the list from our technical support. Laptop Desktop AUX MIC IN OUT MIC IN VGA IN CAMERA IN VIDEO IN DC 19V Setting Up AVer HVC This section provides useful tips on how to set up the AVer HVC components.
ENGLISH Installing L-Bracket Use the L-bracket on your LCD monitor. 1. Attach the supplied Velcro strips on the L-bracket. One on top, two underneath and the larger one on the front side. 2. Remove the adhesive cover and place the Lbracket on the LCD monitor. 3. Place the HVC camera on top of the L-bracket. Positioning the MIC The microphone reception is ideal when placed within 3m of any speaker.
ENGLISH Running the AVer HVC Upon running the AVer HVC for the first time (or the system has been reset), the system will instantly direct you to the Quick Start menu. See Quick Start. Navigating the Menu and Settings 1. In the Home menu, press ► and ◄ on the remote to toggle between the 5 selections. 2. Press to make a selection or the new setting to take effect. Using the On-screen keyboard and numeric pad 1. Use the ▲, ▼, ◄ and ► buttons to move the selection and 2. Select to make a selection.
ENGLISH H om e Menu S cr een There are 5 selections on the Home menu screen: Cam Ctrl, Dial, Phonebook, Call History, and Setting. Upon running the AVer HVC, the Home menu screen will be displayed. Simply use the ► and ◄ buttons to move between selections and press to select. You can easily place a call and select the site contact either in Phonebook, Call History, or Dial. The administrator can set a security password to prevent changes made to the system setting and WebTool access.
ENGLISH Dial Dial allows you to make a call by entering the IP address and call quality setting. To Make a Call Using Dial 1. Select Dial and press . The on-screen numeric pad will appear. To set the Call Quality, use ▲, ▼, ◄ and ► buttons to move the selection box to the Call Quality dropdown list and press to select the value. 2. Use the numeric button on the remote to enter the IP address and press to make a call.
ENGLISH Add Group 1. Select Phonebook and press 2. Select Group and press . . In grouping the contacts, you can easily categorize the contacts into a specific group such as client, vendor, company, branch, etc. 3. Select New Group and press . 4. Use the ▲, ▼, ◄ and ► buttons to move the selection in the on-screen keyboard and press make a selection. Select and press to to save the new group name.
ENGLISH 5. The new group name will be saved and displayed in the Group list. Edit Group 1. Select Phonebook and press 2. Select Group and press . . 3. Select the name you want to modify in the Group list. 4. Select Edit Group and press .
ENGLISH 5. Use the ▲, ▼, ◄ and ► buttons to move the selection in the on-screen keyboard and press make a selection. Select and press to to save the revised group name. 6. The revised group name will be saved and displayed in the Group list. Delete Group 1. Select Phonebook and press 2. Select Group and press . .
ENGLISH 3. Select the name you want to remove in the Group list. 4. Select Delete Group and press . 5. Select “Yes” to remove the selected group name and “No” to cancel group name deletion. 6. The selected group name will no longer appear in the group list when deleted.
ENGLISH Add Phonebook Entries 1. Select Phonebook and press 2. Select New Site and press . . 3. Select the Group name. 4. Select Site Name box and press .
ENGLISH 5. Use the ▲, ▼, ◄ and ► buttons to move the selection in the on-screen keyboard and press make a selection. Select and press to when you are done to save the new site name. 6. Select the IP address box and press . 7. Use the numeric number button on the remote to enter the IP address and select to save. 8. Select the desired call quality value in the dropdown box and press . The bandwidth setting in the Auto Call Quality selection will be used when Auto is selected in Call Quality.
ENGLISH 9. Select Save to store the newly added site contact and Cancel to undo adding contact. Edit Phonebook Entries 1. Select Phonebook and press . 2. Select the contact you want to modify. 3. Select Edit Site and press .
ENGLISH 4. In the Phonebook > Edit Site screen, you may change the Group name, Site Name, IP Address, and Call Quality. 5. After making the changes, select Save to apply the new changes or Cancel to undo the changes and return to Phonebook menu. 6. The saved changes will be shown in the GroupSite list. Delete Phonebook Entries 1. Select Phonebook and press . 2. Select the contact you want to delete.
ENGLISH 3. Select Delete Site and press . 4. Select “Yes” to remove the selected contact and “No” to cancel contact deletion. 5. The selected contact will no longer appear in the group-site list when deleted. Call History The Call History allows you to check the incoming/outgoing calls and their status. You can also make a call by selecting it in the Call History list. Check the IN/OUT Calls 1. Select Call History and press .
ENGLISH 2. The Call History will show the IP address or the Site name, Date and Time of call and Call status. Refer to the table below to check the call status. Call Status Answered Failed IN OUT Make a Call in Call History 1. Select Call History and press . 2. Use the ▲, and ▼ buttons to move the selection and scroll up and down in the call history list and press to make a call. 3. The call will be connected.
ENGLISH Settings The Setting menu allows you to modify system settings, check the system info, test the system and watch recorded conference files. Administrator The Administrator allows you to set a password to prevent unauthorized users from changing the system settings, accessing WebTool, and VCLink feature. Enable/ Disable Administrator Setting 1. Select Setting and press . 2. Select Administrator and press 3. Select Enable Admin and press .
ENGLISH 4. Make sure to change the default password in Change Admin. Password and Change VCLink Password. Note: Default password is 1234 5. Use the ▲, ▼, ◄ and ► buttons to move the selection in the on-screen keyboard and press make a selection. Select and press to when you are done entering the password. 6. You will be asked to enter the password again for confirmation. 7. The entered password will be saved. Press to go back to previous menu.
ENGLISH Setup the AVer HVC 1. In the Home menu, click Setting and select System Settings > Quick Start. If the system is administrator password protected, you will need to enter the password to change the System Settings. 2.
ENGLISH Setup the Language 1. Select Language and press . 2. Use the ▲ and ▼buttons and select from the language you prefer. 3. Press to change the system into the selected language. Setup the System Name 1. Select System Name and press . 2. Use the ▲, ▼, ◄ and ► buttons to navigate and to make a selection. 3. Select and press to save and take effect the action and return to previous menu. The system name will be displayed on the screen for 5 sec after making or answering a call.
ENGLISH LAN Configuration 1. Select LAN Configuration and press . 2. In Obtain IP Address selection, select the type of IP and press . DHCP – configures the system to automatically obtain an IP address from the DHCP server. Static IP – configures the system to use the assigned IP address. Select this when the public IP address is available. Your IP address is - shows the current IP address; enter info when you need to configure your IP address manually.
ENGLISH Set up the Network 1. Select Network and press . You may also set the network setting in Network selection. Go to Setting > System Settings > Network. 2. Select the maximum transmitting and receiving bandwidth and press to make a selection. Max. Transmitting/Receiving Bandwidth allows you to specify the maximum bandwidth of the outbound and inbound calls. AVer HVC system supports up to 4Mb. Auto Call Quality – allows you to predefine a default outbound/inbound bandwidth.
ENGLISH General Settings In General Setting, you can enable/disable Far Control of Near Camera to allow the far site to control your Camera, select the system language, enable/disable Auto Power-off mode, change the display setting, set the system to automatically answer/reject the incoming calls, and setup the system date and time. Enable/Disable Far Control of Near Camera: 1. Select Setting and press . 2. Select System Settings. 3.
ENGLISH 4. Select Far Control of Near Camera. Enable to let the far site control your camera. Set the Language 1. Select Setting and press . 2. Select System Setting > General Setting and press . 3. Select Language and press to show the language list. Use the ▲ and ▼ buttons and press to make a selection.
ENGLISH Set the Auto Turn Off Timer 1. Select Setting and press . 2. Select System Settings > General Setting and press . 3. Select the Auto Power-off Mode drop-down box and press . Then select the idle time before the system automatically turns off or OFF to disable this feature. The feature will completely turn off the system. To turn on the system you need to press the Power button on the main unit. Set the Display Ratio/TV Underscan/Screen Saver 1. Select Setting and press .
ENGLISH 2. Select System Setting > General Setting and press . 3. Select Monitor and press . 4. Select the Monitor Aspect Ratio drop-down box and press . Choose the appropriate aspect ratio of the display device you using. If you want the system to automatically detect the right setting, choose Auto. Press to make the selection. 5. Enable TV Underscan to reduce the image to display the black borders when using the HDMI video output.
ENGLISH 6. Select the Screen Saver drop-down box and press . Then select the time for the system to automatically switch to standby mode or OFF to disable this feature. Press to make a selection. The screen will turn black when the system is in standby mode. Press any button on the remote to wake up the system. Call Settings Call Setting allows you to enter or change your system’s site name which will appear on the screen during the call session for the other party to identify you.
ENGLISH 3. Select Auto Answer and press . In the Auto Answer menu, select OFF to turn off Auto Answer, ON to answer the call automatically, and Do Not Disturb to automatically reject incoming calls. If you are already in a conference, even if the Auto Answer is turned on, you need to manually accept the next call. Session Initiation Protocol (SIP) 1. Select Setting> System Settings> General Setting> Call Settings > SIP and press . 2.
ENGLISH 4. Set the SIP Port. Change this value only if you use specific settings in your network system. The default SIP port setting is 5060. 5. Select the Preferred Protocol and choose which type you want the system to use as default. If the system is unable to establish the call, it will attempt the other protocol.
ENGLISH Network Network allows you to set the network bandwidth, auto call quality, gatekeeper and firewall settings. Set the Gatekeeper 1. Select Setting > System Settings > Network and press 2. Select Gatekeeper and press . 37 .
ENGLISH 3. The Gatekeeper in AVer HVC serves the purpose of translating services from E.164 IDs to IP addresses in an H.323 network. Select the following to setup the Gatekeeper. H.323 name: the gatekeeper will use this name to identify your system. H.323 Extension (E.164): enter numeric data for the gatekeeper to use to identify your system further. Gatekeeper IP Address: enter the IP address for the gatekeeper server. Use Gatekeeper: activate/deactivate gatekeeper.
ENGLISH 3. AVer HVC supports firewall traversal of H.323 calls. Select the following to setup the Firewall. TCP/UDP ports: By default, the system communicates through TCP/UDP ports in the range from 30000 to 30039. You can specify the range for your specific network environment. Note: You must configure your firewall to allow inbound/outbound traffic through TCP ports 1720/1719 for H.323 call setup Enable H.460 Firewall Traversal: Make sure your gatekeeper supports this feature before enabling it.
ENGLISH Video/Audio In Video/Audio settings, you can enable/disable keypad tones, set the MIC gain level, and select the preferred video and audio codecs. Enable/Disable Keypad Tone 1. Select Setting > System Settings > Video/Audio and press . 2. Select the Keypad Tone check box and press . This will enable/disable tone sounds when you are dialing a number using the remote control. Set the Camera White Balance/Exposure/Frequency 1. Select Setting > System Settings > Video/Audio and press 40 .
ENGLISH 2. Select Camera and press . 3. Select White Balance drop-down box and press . Then select the type of mode you prefer and press . 4. Select Exposure drop-down box and press . Then select the exposure level you prefer and . press 5. Select Frequency drop-down box and press . Then select the correct frequency setting and press .
ENGLISH Set the MIC Gain Level and MIC Input Source 1. Select Setting > System Settings > Video/Audio and press 2. Select Microphone and press . 3. Select Mic Gain Level and press from the mic gain level up to 9. . Adjust AVer HVC allows you to adjust mic gain level for proper MIC volume to improve audio reception on the microphone(s). 4. Select MIC Through and press . Select the source of the MIC.
ENGLISH Specify the Video/Audio Codecs 1. Select Setting > System Settings > Video/Audio and press 2. Select Video/Audio Codecs and press . to specify the codecs you want to support. While the AVer HVC supports the H.323 standard coding algorithm, each codec has unique properties and performs best given a certain set of circumstances. For Video : H.264, H.263+, H.263, H.261 For Voice : G.728, G.722.1C, G.722.1, G.722, G.711 Please contact system administrator if you have any question on these codecs.
ENGLISH Reset System Reset System allows you to restore the system back to factory settings, which will clear phonebook entries and call history. Make sure to back up the information before resetting the system. Reset the System 1. Select Setting > System Settings > Reset System and press 2. Choose from the selections to reset the system, clear the phonebook, or clear the call history. Default Setting Reset: LAN configuration, video/audio codec selection and call settings will be reset.
ENGLISH Te s t i n g t h e N e t w o r k This feature tests the network connection between a local and far site. Network Test: 1. In the Home menu, click Setting. 2. Select Test > Network Test. 3. Select OK to continue or Cancel to stop this operation. Press to make a selection. 4. Wait until the network test completes. A check mark will appear if the network test is successful. If it fails, please save the report in a USB flash drive and contact our technical support for further assistance.
ENGLISH Test the Video and Audio: 1. In the Home menu, click Settin g. 2. Select Test > Video/Audio. 3. You will be able to see two identical video displays to show that your video is working. To test the speaker and mic, speak into the mic. If you can hear your voice, it means your speaker and mic are working. Press to exit.
ENGLISH Save and Send the System Log: If you encounter unknown issues and are unsure of how to troubleshoot the unit, sending us the saved system log data can help us analyze the problem faster. 1. Insert a USB Flash drive into the USB Port of the HVC System. USB Flash Drive 2. In the Home menu, click Setting > Test > Save System Log and press 3. . The system log will be saved to the USB Flash drive. 4. After the file is saved, press . 5.
ENGLISH M a n a g i n g t h e AVe r H VC S y s t e m U s i n g t h e W e b To o l The WebTool allows you to access your AVer HVC system remotely using an internet browser. You can view the camera, control screen interface and remote control. You can also access the Phonebook to add, edit and delete entries, view and download the call history, update the system, and restore your previous settings. A c c e ss U si n g a n In te r n e t B r ow se r : 1. Type your HVC’s IP address in the URL field.
ENGLISH 2. The video screen and remote control will appear. You can use all the buttons on the screen and remote like you normally would when you use your HVC. To return to WebTool main page, click . Add, Edit and Delete Phonebook Entries 1. In WebTool page, click Phonebook. 2. In the Phonebook page, you can modify phonebook entries by clicking New Site, Edit Site, Delete Site and New Group. You can also download the phonebook entries and upload them to another AVer HVC unit.
ENGLISH 2. You will be prompt to open, save or cancel the operation. Click Save. 3. Locate on where you want to save the file. Click Save. 4. You will be prompted to open the file or close the message box when the download is compete. E d i t a n d S a ve t h e D o w n l o a d e d P h o n e b o o k E n t r i e s 1. Locate and open the file using MS Excel and select As an XML list. Click OK. 2. Click ok to create a schema based on the XML source data.
ENGLISH 3. You may now edit the file. 4. Make sure to save the file as XML Data so it can be uploaded back to the system. Upload Phonebook Entries 1. Click Browse… and locate the phonebook xml file you wish to upload.
ENGLISH 2. Select the xml file and click Open. 3. Click Send. 4. Click OK to replace the existing phonebook in the system with the new one. 5. You will be notified when you have successfully uploaded the file. Click OK. D own lo a d C a l l H is to r y 1. Click Call History in the WebTool page.
ENGLISH 2. Click Download History. 3. You will be prompted to open, save or cancel the operation. Click Save. 4. Locate where you want to save the file. Click Save. 5. You will be prompted to open the file or close the message box when the download is complete.
ENGLISH Add Phonebook Entries fr om the Call Histor y 1. Select a call in the call history list with the IP address you wish to add. Click the check box. 2. Click Add to Phonebook. 3. Select the Group (if desired), enter the site name and select the Call Quality. Then click save. The new entry will be listed in the phonebook. Update the System 1. Go to our website and download the latest firmware update file. Then Click Setting > System Update.
ENGLISH 2. Click Browse and locate the downloaded firmware file. Click Send to begin the system update or Cancel to stop this operation. B a ck u p th e Sy s te m Se t ti n g s 1. Click Setting. 2. Click System Restore. 3. Click Download Settings.
ENGLISH 4. You will be prompt to open or save the file. Click Save. 5. Click Save. 6. You will be prompt to open or close the message box. Click Close. Re sto r e th e Sy s te m Se t ti n g s 1. Click Browse….
ENGLISH 2. Locate the system setting file to be used for restoration and click Open. 3. Click Restore Setting. 4. You will be notified that the system setting upload is successful. Click OK. 5. On your HVC screen, you will be prompted that the system setting is updated via internet. Press to close the message box and reboot the unit. U s i n g t h e AV e r H V C Once when you are done setting up the system, you may start to make calls.
ENGLISH Making a Call You have 3 option to make a video call. Selecting the site contact in the Phonebook list, dialing the IP address, or selecting a previous call in the Call History list. Call Using the Phonebook: 1. Select Phonebook and press . 2. Select the site contact in the list and press 3. The call will be connected. Call Using Dial: 1. Select Dial and press . 58 .
ENGLISH 2. Use the numeric buttons on the remote to enter an IP address and press to make a call. The speed setting in Auto Call Quality will be used when Auto is selected. 3. The call will be connected. Call Using Call History: 1. Select Call History and press . 2. Select the site you want to call in the call history and press .
ENGLISH 3. The call will be connected. 4. If the call fails, the IP address may have been entered incorrectly, the far site is set to Do not Disturb mode or the far site hung up the call. End MCU Call: 1. Use the ▲ and ▼ buttons to select which site you want to disconnect with and press . To end the meeting, select Disconnect All. Each location/site will be color coded for easy identification. Match the color of the site names to their color frames for visual reference.
ENGLISH USB Flash Drive Playback the Recorded Video on AVer HVC Insert the USB flash drive with the recorded .VC file into either HVC USB port. 1. In the HOME menu, click Setting and select Recording File. 2. Select Recording Video Playback and then select the meeting file you want to watch. 3. In the Recording Video Playback screen, use the left and right buttons on the remote to select the video player buttons to play, pause, and stop the video. Use the Layout button to change the window layout.
ENGLISH Playback the Recorded Video Using AVer VCplayer Make sure your computer meets the minimum system requirements below. Minimum System Requirements • Intel® Pentium® 4 or AMD Athlon® XP or higher processor 2.4GHz Pentium® 4 or Intel core 2 duo or better (recommended) • Windows XP (SP2) or later • 512MB RAM or better • 50MB of available hard-disk space 1. Click start > All Programs > AVer VCplayer > VCplayer, or double-click on the desktop. 2. Click to locate the .VC file. 3.
ENGLISH Start playing the file. Change to different split screen modes (layouts). Stop playing the file. Close the VCplayer application. Rewind the video 5 minutes. Display the VCplayer application information. Skip the video forward 5 minutes. Adjust the Volume. U s i n g VC L i n k M o b i l e This app is available for iOS and Android through their respective app stores. Using your phone’s Wi-Fi connection, VCLink Mobile allows you to control your HVC system with the remote control interface.
ENGLISH 3. Double-click the name in the list to log in. 4. Click on Remote Control tab to bring up the AVer HVC mobile remote. Slide the lower panel left and right to access all features. 5. Click the Phonebook tab, then the AVer HVC tab to access the phonebook of the connected unit. To save the phonebook to your phone, click Copy to Local. The phonebook will be listed in the Personal tab.
ENGLISH To start using VCLink Desktop: 1. Click to register the AVer HVC unit. 2. Enter a Title, the IP Address and VCLink password of the device. Then click OK. 3. Select the registered AVer HVC in the list and click Log In icon. 4. Select the image you want to share and click Share. To stop sharing, click the Log Out icon.
ENGLISH 5. The screen will display the shared image. Tr o u b l e s h o o t i n g Audio 1. Can’t hear the audio during a call . Make sure the MICs are not muted. Make sure the MIC connections are properly connected as illustrated in this manual. Ensure proper volume level on the system. 2. The audio quality is poor. Ensure the mic is not damaged. Try to adjust the "Mic Gain Level”. Make sure the MIC is not facing the output speakers to prevent echo. V ideo / Display 1.
ENGLISH 4. The “Present Failed” error message appeared on my screen when I started the present content The far site you are calling does not support H.239 features or they are disabled. Please contact the system administrator for more information about the settings. N e t wo r k 1. After resetting the system to default settings, the system IP address is still undetectable or an invalid value If the IP/Subnet Mask/Default Gateway shows an incorrect value, you can modify the value in “Static IP” Mode.
ENGLISH Please contact AVer technical support for assistance. 3. Unable to control the far end camera Make sure the Cam Ctrl icon is positioned on the screen you want to control. Press on the remote to switch to the desired screen. Make sure the far site has enabled the Far Control of Near Camera setting. To enable, press and go to Setting > System Setting. Then select "Far control of Near Camera ". 4.
ENGLISH Disclaimer of Warranty EXCEPT AS EXPRESSLY PROVIDED OTHERWISE HEREIN AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AVER DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO THE PRODUCT, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, SATISFACTORY QUALITY, COURSE OF DEALING, TRADE USAGE OR PRACTICE OR THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS.
ENGLISH DISCLAIMER No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its quality, performance, merchantability, or fitness for a particular purpose. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice.
