Installation guide

Name
Function
(4)
(8)
(3)
(5)
(23)
(22)
(12)
(10)
(17)
(16)
(2)
(1)
(18)
(19)
(20)
(14)
(6)
(7)
(9)
(15)
(13)
(11)
(21)
(10) Backspace
Move back one space and delete one character
at a time.
(11) Numeric Pad
Use to enter numeric number.
(12) Input
Switch the input source between HVC camera,
S-Video, Video and VGA.
(13) Far/Near
Select to control either near site or far site
camera. The cam. control icon will appear
on the screen to show which camera site you
are going to control. The cam. control icon will
disappear in 5 sec.
The camera from the far site can only be
operated when the enable far site to
control the camera is permitted.
(14) Layout
Change to different split screen mode.
(15) Back
Return to previous OSD menu selection or exit
OSD mode.
(16) Home
Call up the main screen.
(17) Hang Up
End the call.
(18) 16:9/4:3
Toggle between 16:9 or 4:3 to match the
monitor aspect ratio.
(19) Dual
Switch to Dual monitor mode. This split the
video conference screen and present screen.
The video conference screen will be displayed
on the monitor connected to the HDMI OUT of
the main system and the present screen will be
displayed on the monitor connected to the VGA
OUT of the main system.
(20) *Snapshot
Capture the image from the camera. To view
the captured image, press Image Ctrl.
(21) *Image Ctrl
Switch between camera and image mode.
 Camera mode - allows you to pan, tilt, zoom
in/out, and adjust the focus.
 Image mode - allows you to display the
captured image. To save the captured image
in the USB flash drive, press Record.
(22) *Record
Start/Stop video recording. The video recording
can only be saved in a USB flash drive.
Whether you are in a video conference call or
not, you can do the video recording.
(23) Info
Display the call statistics information.
* Available in HVC330/310 model only.
For more information, visit http://www.aver.com