User`s manual

25
CHAPTER 1
7. After firmware upgrade is completed, the DVR system will check the files of Update folder and if
configuration file and IP camera patch file has found, then, the import and upgrade procedure will be
processed.
8. After all procedures have completed, the Reboot window is show up. Click
Reboot
button and remove the
USB pen drive from DVR unit to restart DVR system.
i
-
The DVR system will reboot automatically if Reboot button hasn’t been click for a period time.
-
Remember to remove USB pen drive after click reboot button; otherwise, the DVR system will start
upgrade process again.
9. After reboot, user can go to
Setup
>>
System
to check the version of firmware and make sure the upgrade
process is successful.
If file is not found, the message
is displayed it.
The message displayed the IP
camera path or import configuration
file that contains in Update folder
has been upgraded or imported.