DL30/DL50 User Manual
Federal Communications Commission Statement NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
DISCLAIMER No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its quality, performance, merchantability, or fitness for a particular purpose. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice. In no event will AVer Information Inc.
WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Warranty will be void if any unauthorized modifications are done to the product. Do not drop the camera or subject it to physical shock. Use the correct power supply voltage to avoid the damaging camera. Do not place the camera where the cord can be stepped on as this may result in fraying or damage to the lead or the plug. Hold the bottom of the camera with both hands to move the camera.
More Help For FAQs, technical support, software and user manual download, please visit: Global Download Center: https://www.aver.com/download-center Technical Support: https://www.aver.com/technical-support USA Download Center: https://www.averusa.com/pro-av/support/ Technical Support: https://averusa.force.com/support/s/contactsupport Europe Download Center: https://www.avereurope.com/download-center Technical Support: https://www.avereurope.
Contents Package Contents................................................................................................... 1 Camera Mount Suggestions (Optional Accessories) ......................................... 1 Product Introduction ................................................................................................ 2 Overview ............................................................................................................ 2 LED Indicator .......................................
Set Up IP Address of the Camera ................................................................... 13 If there is DHCP environment .................................................................. 13 Or if you want to configure by yourself .................................................... 13 Web Setup ....................................................................................................... 14 Use the AVer IPCam Utility to Find the Camera ..............................................
Preset ....................................................................................................... 24 Exposure .................................................................................................. 25 Image Process ......................................................................................... 25 Video & Audio........................................................................................... 26 Network ................................................................
Package Contents Camera Unit M2 x 4mm Screws (x2) Power Adapter & Power Cord Quick Start Guide Cable Fixing Plate Cable Ties (x4) Remote Control USB Cable or 1/4”-20, L=7.5mm Screw User Manual* Warranty Card* *Only for Japan Camera Mount Suggestions (Optional Accessories) For details on optional accessories, consult your local dealer.
Product Introduction Overview 1 4 56 7 8 9 2 3 (1) Camera Lens (4) Kensington Lock (7) USB Port (2) IR Sensor (5) Audio In* (8) DC Power Jack (3) LED Indicator (6) HDMI Port** (9) PoE+ Port*** *Line input level: 1Vrms (max) *Mic input level: 50mVrms (max); Supplied voltage: 3.3V **DL30 does not support HDMI port. ***Only support IEEE 802.3at PoE+ standard.
Pan and Tilt Angle ±90° ±170° Dimension 200mm (7.87”) 162.2mm (6.39”) 158.8mm (6.
Cable Fixing Plate Installation 1 Secure the cable fixing plate to the camera with two M2 x 4mm screws in the package. Use four cable ties in the package to secure the cables and cable fixing plate. Plug in cables. [Note] DL30 does not support HDMI port.
Device Connection CaptureShare Laptop/Desktop (Management/Presentation) Microphone Audio Input USB Monitor/TV (Display) PoE+ IEEE802.3at or DL Tracking Camera Lecture Capture System (Record) HDMI (Not for DL30) LAN PTZ Management Web Application (Remote Management) PoE+ Connection Connect the camera to the router or switch through the PoE+ port. [Note] Only support IEEE 802.3at PoE+ standard.
HDMI Connection Use the HDMI cable to connect with monitor or TV for video output. HDMI cable Monitor/TV [Note] 1. DL30 does not support HDMI port. 2. HDMI monitor can be connected to camera and output live video. Assuming HDMI monitor is well connected before the camera is turned on, the OSD menu will be displayed on HDMI monitor in default.
Audio Input Connection Connect the audio device for audio receiving. [Note] 1. Line input level: 1Vrms (max) 2. Mic input level: 50mVrms (max); Supplied voltage: 3.3V 3. Because video conferencing software such as Google Hangouts (Windows), Skype (Mac), or Teams (Windows and Mac) can automatically adjust volume, the user might experience randomly unstable volume while using the camera.
Ceiling Mount Installation (Optional) 1. Use two M2 x 4mm screws (in the DL camera package) to secure the cable fixing plate (in the DL camera package) to the camera. Plug in cables. Use four cable ties (in the DL camera package) to secure the cables and cable fixing plate. 2. Use four M4 (L≥10mm) screws (not supplied) to secure the mount bracket on the ceiling. 3. Use three 1/4”-20, L=7.5mm screws (in the ceiling mount kit) to install another mount bracket on the camera. 4.
Wall Mount Installation (Optional) 1. Use two M2 x 4mm screws (in the DL camera package) to secure the cable fixing plate (in the DL camera package) to the camera. Plug in cables. Use four cable ties (in the DL camera package) to secure the cables and cable fixing plate. 2. Use the drilling paper included in the package to drill the holes in the wall where the user wants to mount the camera. 3. Use the screws (not included) to secure the L-mount bracket on the wall.
5. After assembling the L-mount brackets, use the screws (not included) to secure the lower part of L-mount brackets on the wall. [Note] For cement wall: M4 x 20mm self-tapping screws (x2) + plastic conical anchor For wooden wall: M4 x 20mm self-tapping screws (x2) 6. Pass the cables through the hole on the L-mount brackets and connect the cables to corresponding connection ports. 7. Use the remaining screw (1/4”-20, L=7.5mm, included in the package) to secure the camera on the L-mount brackets.
Tracking Setup • Distance range to podium: 8~9m is suggested. • Tracking distance for upper body: 2~16m; tracking distance for full body: 3~28m. • Suggested setup position: center of classroom. • Install height range (from floor): 2~3m; 2.4m is suggested. • No human outline on poster/screen/monitor/TV in the background. • No more than three people in a single camera view.
Remote Control The remote control requires two “AAA” size batteries. Make sure batteries are installed properly before use. Name Function (1) Power Turn the unit on/standby/privacy: Press once to turn on privacy mode. Press again to turn off privacy mode. Long press for 3 seconds to turn on standby mode. Short press again to turn off standby mode. (2) Remote Control LED It will be on when pressing other buttons. (3) Menu Open and exit the OSD menu. [Note] DL30 does not support OSD menu.
(17) Camera Select CAM1 to CAM4 buttons. Select a camera to operate. Once a camera is selected, the CAM button LED will be on when pressing other buttons. Hot Key Press certain button on remote controller to perform hot key function. Button Action Function 5 Press five times (55555) Turn on DHCP. 7 Press seven times (7777777) Show the tracking indicator. When the hot key takes effect, you will see the tracking indicator on the target outline.
Web Setup Connect the camera from a remote site through the Internet. Use the AVer IPCam Utility to Find the Camera To find the IP address of your cameras, you can execute the IPCam Utility installer. Follow the below steps to find the IP address of the camera. 1. Download the IPCam Utility from Global: https://www.aver.com/download-center USA: https://www.averusa.com/education/support Europe: https://www.avereurope.com/download-center 2. Run the IPCam Utility. 3.
Make a Connection to the Camera via Browser Open the browser and enter the IP address of the camera. The PC/laptop requires an internet access. After connecting to the camera, enter the user account and password (default is admin/admin) to log in Web. [Note] User will be asked to set a new account and password after first login. Please use the new account and password to log in later.
Live View In live view, the user can make a snapshot, set up camera control (zoom in/out, camera direction control, pan/tilt speed, focus), view preset, and tracking control (on, off, tracking mode). Snapshot Select the camera button to make a snapshot and download the file to local storage.
Pan-Tilt-Zoom Control To operate the PTZ Camera motion, use , and to adjust the camera view position and use and to zoom. Select , to go back to default position. Manual Pan-Tilt Speed Adjustment Adjust the speed of manual Pan-Tilt. [Note] The max manual pan speed is 90°/sec. The max manual tilt speed is 45°/sec.
Focus Switch to auto (AF) or manual (MF) focus. The manual focus use “+” and “–” to adjust focus. Select “+” to adjust focus to the far end and focusing on a far subject; select “-” to adjust focus to near end and focusing on a near subject. One push focus: By clicking the button to adjust Lens focus automatically once. Preset Position Select the number to view preset positions. User can also enter preset position number (0~255) in “Go to” column directly for a quickly calling section.
Tracking Control Enable/disable tracking function, select tracking mode, and operate one-click tracking function. Tracking mode (refer to Tracking Settings section for setup) Presenter: Camera will start tracking when object enters the tracking point. [Note] Tracking point under presenter mode: default set is preset 1. When preset 1 is not set, tracking point is home position. Zone: Camera will start tracking when object is moving between the preset tracking block area.
Settings Tracking Settings Enable/disable tracking function, set up tracking mode, operate one-click tracking function and pan/tilt/zoom the camera. [Note] Tracking will be off when activating pan/tilt/zoom or go to preset point. Tracking Control Enable/disable tracking function, select tracking mode, operate one-click tracking function (refer to Tracking Control section), and pan/tilt/zoom the camera.
Presenter Select the “Presenter” tab in Tracking Settings interface. Camera will start tracking when object enters the tracking point. 1. Use , , , , and to adjust the camera to tracking point. 2. Then, select Save to Preset 1 to save the tracking point. 3. Tracking Sensitivity: sets the sensitive level of tracking. Move bar to set the value. The current value is displayed at upper right corner. 4. Time of Return to Tracking Point: sets the idle time for camera return to tracking point.
Zone Select the “Zone” tab in Tracking Settings interface. Set up 2 to 4 block areas for the camera. Each block is corresponding to one preset position. Camera will switch between preset positions when the presenter enters different blocks. 1. Select the “Number of block” (2, 3, or 4).
2. Select the block and set the preset positions in order (preset 6 to preset 9). Use , , and , , to move the camera to wanted position and select “Save” to save the preset position. And, a snapshot of the preset image will show at corresponding image display box. Repeat the steps to set another preset position. [Notes] Set each preset overlapping with the next one (one man width). Set the preset view to clearly see at least 60% upper body of the presenter to ensure tracking accuracy.
Camera Settings Camera Control The user can set up camera control (zoom in/out, camera direction control, focus, pan/tilt/zoom speed), and enable/disable digital zoom function. Preset Set up preset position and view preset position. 1. Select the “Preset” tab in Camera Settings interface. 2. Use , , , and to adjust camera view position. 3. Enter preset position number (0~255) in Save Preset column and select “Save” to save the position. 4.
[Note] Preset point value includes: pan/tilt/zoom, exposure, shutter, iris, ev, brightness, gain, slow shutter, white balance, focus, focus position, digital zoom, and R&B gain. Exposure Select the “Exposure” tab in camera settings interface. Set up the exposure type - Full Auto or Manual and relevant settings. Image Process Select the “Image Process” tab in camera settings interface. Set up the white balance, saturation, contrast, sharpness, noise filter, mirror, and flip.
Video & Audio The user can set up Power Frequency, Video Mode, Stream Video Output, Bitrate, Encoding Type, Framerate, I-VOP Interval (S), Rate Control, Audio Input Type, Audio Volume, and Sampling Rate. 3 types of video modes can be selected and each one only supports single function, Stream Only: supports RTSP/RTMP only. USB Only (factory default): supports USB port output only; not compatible with AVer PTZ Management and PTZ Control Panel. Please switch to other two modes if necessary.
Network Set up IP address of camera – DHCP or static IP, Netmask, Gateway, and DNS. After setting, select “Confirm” to apply settings. RTMP Setting Follow below steps to set up RTMP: 1. Get the RTMP server URL and stream key from the broadcasting platform and enter in “Server 2. Select “Start Stream” to begin uploading the live video of the camera to the broadcasting URL” and “Stream Key” column. platform. 3. Select “STOP” to stop uploading the video.
System The system information of camera is displayed in this page, including Model Name, IP Address, Serial Number, MAC Address, and Firmware Version. Upgrade firmware: follows below steps to upgrade the firmware. 1. Download the newest firmware from: Global: https://www.aver.com/download-center USA: https://www.averusa.com/education/support Europe: https://www.avereurope.com/download-center 2. Connect to the camera through the browser. 3. Select System > Upgrade firmware > Choose File. 4.
FAQ 1. Can I pan, tilt, zoom, and set preset point when tracking is on? Yes, but tracking will be off when activating pan/tilt/zoom or go to preset point. 2. Any value will be auto saved and shifted when going to the preset point? Yes, preset point value: PTZ, exposure, shutter, iris, ev, brightness, gain, slow shutter, white balance, focus, focus position, digital zoom, R&B gain. 3.
Specification* DL30 Camera Image Sensor 1/2.8” CMOS Effective Picture Elements 2 Megapixels Output Resolutions USB: 1080P60 (max) RTSP: 1080P60 (max) Minimum Illumination 0.5 Lux (IRE50, F1.6, 30FPS) S/N Ratio ≥ 50dB Gain Auto, Manual TV Line 800 (Center/Wide) Shutter Speed 1/4 s to 1/10,000 s (60Hz) 1/3 s to 1/10,000 s (50Hz) Exposure Control Full Auto, Manual, WDR White Balance Auto, Manual Optical Zoom 12X Digital Zoom 2X DFOV: 84.1° (Wide) to 7.8° (Tele) Viewing Angles HFOV: 76.
Camera Control - Protocol VISCA (IP), CGI (IP), USB Noise Reduction 2D/3D NR Image Effect Flip, Mirror WDR Yes Power Frequency 50 Hz, 60 Hz AI Auto Tracking Functions Tracking Mode Presenter Mode, Zone Mode Sleep Mode Sleep Mode Yes (Control by Web Page and CaptureShare) Audio Channel 2ch Stereo Codec AAC, PCM Sample Rate AAC (48/32/16/8Khz), PCM (48Khz) Interface Video Outputs IP, USB Audio Outputs IP, USB Audio Inputs MIC in, Line in General Power Requirement AC100 - 240V to DC1
Storage Conditions Temperature: -20°C to +60°C Humidity: 20% to 95% IP Streaming Resolution Network Video Compress Formats 1080P (60FPS) H.
Software Tools Single Camera Control Multi-Camera Control and Configuration AVer CaptureShare (via USB), AVer PTZ Control Panel (via IP) AVer PTZ Management (via IP) AVer CaptureShare/Information Device IP Searching AVer PTZ Control Panel/Auto Search AVer PTZ Management/Setup/Device/Add/Auto Search Warranty Camera 3 Years Accessories 1 Year *Specifications are subject to change without prior notice.