Specifications

ManualsBrandsAvenview ManualsSwitchSW-VGA-5X5

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no

representaons or warranes with respect to the accuracy or completeness of the contents of this publicaon and reserves the

right to make changes to specicaons and product descripons at any me without noce. No license, whether express, implied,

or otherwise, to any intellectual property rights is granted by this publicaon. Except as set forth in Avenview Standard Terms

and Condions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relang to its

products of Avenview Inc. is strictly prohibited.

Avenview

5 In 5 Out VGA Matrix Switch with Audio

Model #: SW-VGA-5X5

Summary of content (12 pages)

PAGE 1
Avenview 5 In 5 Out VGA Matrix Switch with Audio Model #: SW-VGA-5X5 © 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice.
PAGE 2
Table of Contents Section 1: Getting Started.......................................................................................................................1 1.1 Important Safeguards...............................................................................................................1 1.2 Safety Instructions....................................................................................................................1 1.3 Regulatory Notices Federal Communications Commission (FCC)..
PAGE 3
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover • Any product, on which the serial number has been defaced, modified or removed.
PAGE 4
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user's authority to operate this equipment. 1.4 Introduction This SW-VGA-5X5 is a 5 input 5 output commercial VGA with audio matrix switcher.
PAGE 5
1.7 Before Installation • Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. • Don't place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. • Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. 1.8 Panel Description FRONT PANEL 1 2 3 4 5 6 7 8 1. Display of the Selected Input Channel 2.
PAGE 6
1.9 Channel Control Method A: Front panel push button control 1. Use the “+” or “–“ channel button on output port to select which port to be changed. “+”: change selected output port in ascending order “–“: change selected output port in descending order 2. Push the “+” or “–“ channel button on Input channel to select the VGA input source you want to display on this selected output port in step 1 in sequential order.
PAGE 7
Method C: Software Control via the RS-232 port VGA input source selection area VGA output port selection area Status indicator Software Control Menu 1. Setting button: Click Get button to read back device ID. Click Set button to write device ID. Click Rename button to open the String Table. In the String Table, assign the captions for each input and output port for easy recognition. Example Rename the Input1 to “Main PC”, Input2 to “Sub PC,” input3 to “PC-3,” … etc., and rename output1 to “Conf.
PAGE 8
2. Scan button: Serial Port Scan: Click Scan button, the machine will scan the all com port and show them. Select the RS232 serial port connected to the machine. And set device ID 255 is for all device. Only the same device id or 255 can get the command you sent. Click OK. Get the new status from the machine you select. 3. Linkage button: Click Linkage button to read back all status. 4. Open/Close button: Click this button to close or open COM port. 5.
PAGE 9
7. Output Port: Pull down menu and select which source to be sent to this output port. One by one setting On main menu screen First select input source. Then select the output ports which you want to send the video and audio from this source. When you select the input source, the source will change to gray. When you select the output port one by one, the selected output port will change to gray. The linking line will change to yellow. Group setting First select output ports one by one.
PAGE 10
Command Set: COMMAND ACTION COMMAND ACTION ST System Status VR Firmware Version A1 Output A select Input 1 B1 Output B select Input 1 A2 Output A select Input 2 B2 Output B select Input 2 A3 Output A select Input 3 B3 Output B select Input 3 A4 Output A select Input 4 B4 Output B select Input 4 A5 Output A select Input 5 B5 Output B select Input 5 C1 Output C select Input 1 D1 Output D select Input 1 C2 Output C select Input 2 D2 Output D select Input 2 C3 Output C sele
PAGE 11
Section 3: Specifications Item Description Model SW-VGA-5X5 (VGA Matrix Switch) Supported Input / Output VGA / Component / S-video / Composite* Video Bandwidth 400 MHz Supported Resolutions 1080p60, WUXGA (1920x1200@60) & UXGA (1600x1200@60) Transmission HD (720p/1080i) – 65m (210ft) Audio Support Analog Stereo Input 5 x VGA (Component through VGA to Component Cable) 5 x 3.5mm Analog Audio 1 x RS232 Output 5x VGA [component/s-video/composite]* 5 x 3.
PAGE 12
Avenview Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc.