Specifications

www.avenview.com|6
1.7 Panel Description
1.7.1 SW-HDM3D-C6-8x8E Front Panel
1. SOURCE STATUS: Input source indicator LED
2. IR SENSOR: IR sensor for receiving the IR
commands from IR remote
3. Output Push Button & 7-segment LED:
Front panel push buttons used to select the
number of display channel & LED display for
output ports
4. Input Push Button & 7-segment LED:
Front panel push buttons used to select the
number of input source & LED display for
input channels
1.7.2 SW-HDM3D-C5-8x8E Rear Panel
5. +5V DC: 5V DC power jack
6. ETHERNET: Ethernet control port
7. RS-232: RS-232 control port
8. SYSTEM IR RECEIVER: Ext. IR receiver
9. All IR Output: 3.5mm IR blaster socket for
HDMI source control on all 8 inputs
10. INPUT 1-7: HDMI inputs
11. IR Blaster 1-8: 3.5mm IR blaster socket for
individual HDMI source control
12. INPUT 8 & EDID Port: HDMI input & EDID
port for learning EDID from display
13. OUTPUT PORT 1-4: RJ-45 outputs for each output channel