Specifications

Page |9
www.avenview.com
2.5 IR CONTROL INSRTUCTIONS
IR BLASTER CABLE
IR RECEIVER CABLE
SW-HDM3D-C6-4X4E IR SOCKETS
ALL IR OUT: The default location for IR blaster to transmit all IR command signals received from any of the four
remote receivers to all of the HDMI sources.
IR BLASTER 1-4: IR blaster connected here can only transmit IR command signals from the remote receivers
that are setting at respective input channel from 1 to 4.
SYSTEM IR: Receives IR commands from remote control
HDM3D-C6SW-R
IR BLASTER: IR control on individual display device
IR RECEIVER: IR receiver connected here can receive all IR command signals from the IR remote controls of
SW-HDM3D-C6-4X4E and all other HDMI source devices.
IR BLASTER
IR RECEIVER
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please
check carefully before plugging in the IR extender to the respective IR sockets. Warranty will not
cover the damage.