Specifications

Page |7
www.avenview.com
2.4 PANEL DESCRIPTION
SW-HDM3D-C6-4X4E- FRONT PANEL
1. SOURCE STATUS : Input source indicator LED
2. IR SENSOR: IR sensor for receiving the IR commands
from IR remote
3. OUTPUT PUSH BUTTON & 7-SEGMENT LED:
Front panel push buttons used to select the number of
display channel & LED display for output ports
4. INPUT PUSH BUTTON & 7-SEGMENT LED:
Front panel push buttons used to select the number of
input source & LED display for input channels
SW-HDM3D-C5-4x4E REAR PANEL
5. RS-232: RS-232 control port
6. ETHERNET: Ethernet control port
7. INPUT 1-3: HDMI inputs
8. INPUT 4 & EDID PORT: HDMI input and
edid port for learning edid from display
9. OUTPUT PORT 1-4: RJ-45 outputs for each
output channel
10. IR BLASTER 1-4: 3.5MM IR blaster socket
for individual HDMI source control
11. SYSTEM IR RECEIVER: EXT. IR receiver
12. ALL IR OUTPUT: 3.5MM IR blaster socket
for hdmi source control on all 4 inputs
13. +5V DC: 5V dc power jack