Specifications

Page |5
www.avenview.com
SECTION 2: SWHDM3D-C6-4X4E
2.1 INTRODUCTION
The Avenview SW-HDM3D-C6-4x4E, HDMI Matrix with IR, Full 3D Support and now Ethernet over Single
CAT6 provides the most flexible and cost effective solution in the market to route high definition video sources
plus multi-channel (up to 7.1 channel) digital audio from any of the eight HDMI sources to the remote displays at
the same time. Through low cost Cat-5/5e/6 LAN cables, not only high quality video and audio can be transmitted
to the display sites, but also users can switch among eight HDMI sources using the push-in button or remote
control. With single power design at the source site, each remote module is easily installed without power supply.
Furthermore, the built-in IR extension function, users can control the HDMI source devices such as Blu-ray Disc
Player, Satellite Receivers etc. at display site directly.
- Supports HDMI Deep Color & Full 3D
- HDCP compliant
- Allows any source to be displayed on multiple displays at the same time
- Allows any HDMI display to view any HDMI source at any time
- Supports 7.1 channel digital audio
- Supports default HDMI EDID and learns the EDID of displays
- The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote
control, or RS-232 control
- Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from remote
receiver to matrix master
- Allows to control matrix master through IR remote control at remote receiver’s site
- Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI
source device, better grade HDMI display, and better quality solid CAT6 cable
- Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively
- Fast response time – 2~5 seconds for channel
- Ethernet Control