Specifications

Page |23
www.avenview.com
SECTION 3: SPECIFICATIONS
ITEM
DESCRIPTION
UNITS
SW-HDM3D-C6-4x4E
HDM3D-C6SW-R
UNIT DESCRIPTION
4x4 HDMI Matrix Switch over CAT6
with 3D Support
HDMI Receiver over CAT5 with 3D
Support
HDMI COMPLIANCE
HDMI Deep Color & Full 3D
HDCP COMPLIANCE
Yes
VIDEO BANDWIDTH
Single Link 225 MHz (6.75Gbps)
SUPPORTED
RESOLUTIONS
480i / 480p / 720p / 1080i / 1080p60
RESOLUTION AND
DISTANCE
Full HD: (1080p) ~ 35meter (115feet) (CAT5e) / 40meter (130feet) (CAT6)
HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 55meter (180feet) (CAT6)
AUDIO SUPPORT
Surround Sound (up to 7.1 Ch.) or Stereo Digital Audio
EQUALIZATION
-
8 Level Digital Control
INPUT TMDS SIGNAL
1.2 Volts (peak-to-peak)
INPUT DDC SIGNAL
5 Volts (peak-to-peak, TTL)
ESD PROTECTION
- Human body model — ±15kV (air-gap discharge) & ±8kV (contact
discharge)
- Core chipset — ±8kV
INPUT
4x HDMI / 1x RS-232 / 1x Ethernet
1x IR socket for IR receiver
1x RJ-45 /
1x IR socket for IR receiver
OUTPUT
4x RJ-45 /
5x IR socket for IR blaster
1x HDMI /
1x IR socket for IR blaster
HDMI INPUT SELECTION
Push Button / IR Remote / RS232
Push Button / IR Remote
HDMI SOURCE CONTROL
Through IR Control Path from IR Receiver at Remote Receiver to IR Blaster at
Matrix Switch
IR REMOTE CONTROL
Electro-optical characteristics: = 25° / Carrier frequency: 20~60kHz
HDMI CONNECTOR
Type A (19 pin female)
RJ45 CONNECTOR
WE/SS 8P8C with 2 LED indicators
RS232 CONNECTOR
DE-9 (9-pin D-sub Female)
3.5MM CONNECTOR
Earphone jack for IR blaster
[IR Main] IR control on all source
devices
[IR PASS-THROUGH 1~8] IR
control on individual source device
Earphone jack for IR receiver
[IR RECEIVER] Receives IR
commands from remote control
DIP SWITCH
[SW1~SW8] 2-pin for EDID & audio mode
[SW Main] 4-pin for operation & firmware update
DIMENSIONS (L X W X H)
17” x 11” x 1.7”
3.3” x 2.4” x 1”
POWER SUPPLY
5V 4A DC
5V 2A DC
POWER CONSUMPTION
20 Watts [max]
1 Watt [max]
ENVIRONMENTAL
OPERATING
TEMPERATURE
32˚ ~ 104˚F (0˚ to 40˚C)