Specifications

Page |22
www.avenview.com
2.10 EDID LEARNING
SOFTWARE CONTROL: PLEASE REFER TO THE OPERATION APPROACH\ METHOD C:
SOFTWARE CONTROL THROUGH RS-232 PORT
THERE ARE EIGHT EMBEDDED DEFAULT EDID AS BELOW,
1. FULL-HD (1080P@60)-24BIT 2D & 2CH
2. FULL-HD (1080P@60)-24BIT 2D & 7.1CH
3. FULL-HD (1080P@60)-24BIT 3D & 2CH
4. FULL-HD (1080P@60)-24BIT 3D & 7.1CH
5. HD (1080I@60)(720P@60)-24BIT 2D & 2CH
6. HD (1080I@60)(720P@60)-24BIT 2D & 7.1CH
7. FULL-HD (1080P@60)-36BIT 2D & 2CH
8. FULL-HD (1080P@60)-36BIT 2D & 7.1CH
THE EDID LEARNING FUNCTION IS ONLY NECESSARY WHENEVER YOU ENCOUNTER ANY
DISPLAY ON THE HDMI OUTPUT PORT THAT CANNOT PLAY AUDIO AND VIDEO PROPERLY.
BECAUSE THE HDMI SOURCE DEVICES AND DISPLAYS MAY HAVE VARIOUS LEVEL OF
CAPABILITY IN PLAYING AUDIO AND VIDEO, THE GENERAL PRINCIPLE IS THAT THE
SOURCE DEVICE WILL OUTPUT THE LOWEST STANDARDS IN AUDIO FORMAT AND VIDEO
RESOLUTIONS TO BE COMMONLY ACCEPTABLE AMONG ALL HDMI DISPLAYS. IN THIS
CASE, A 720P STEREO HDMI SIGNAL OUTPUT WOULD BE PROBABLY THE SAFEST CHOICE.
NEVERTHELESS, THE USER CAN FORCE THE MATRIX TO LEARN THE EDID OF THE LOWEST
CAPABLE HDMI DISPLAY AMONG OTHERS TO MAKE SURE ALL DISPLAYS ARE CAPABLE TO
PLAY THE HDMI SIGNALS NORMALLY.
THERE ARE THREE METHODS TO DO EDID LEARNING AS BELOW,
1. FRONT PANEL PUSH-IN BUTTON: PLEASE REFER TO THE OPERATION APPROACH\
METHOD A: PUSH-IN BUTTON
2. IR REMOTE CONTROL: PLEASE REFER TO THE OPERATION APPROACH\ METHOD B: IR
REMOTE CONTROL