Specifications
Page |12
www.avenview.com
4.
DEFAULT EDID MODE
1) Push “input+ (default)”button to select the input channel which you want to learn default EDID and then
keep pushing “input+ (default)”button when you select your desired input channel
2) Push the “+”or “-” output push button and then the LED will show “E”“d” one time to enter Learn Default
EDID Mode
3)
Use “+”or “-” output push button to select the default EDID mode(1~8)
4)
Release “input+ (default)”button after selecting the desired default EDID mode, and then the LED will
blink twice and the setting will be effective
5)
It will quit the Learn Default EDID Mode if you push the “input- (learn)”button before the setting is
effective
6)
The LED will show “0”“0” if the setting is success
The LED will show “F”“F” if the setting is failure
5.
EDID LEARNING MODE
1) Push “input- (learn)”button to select the input channel which you want to learn EDID from EDID Port and
then keep pushing “input- (learn)”button when you select your desired input channel
2) Push the “+”or “-” output push button and then the LED will show “E”“L” one time to enter Learn Output
EDID Mode
3)
Use “+”or “-” output push button to select EDID Port(number 4)
4)
Release “input- (learn)”button after selecting the EDID Port number, and then the LED will blink twice and
the setting will be effective
5)
It will quit the Learn Output EDID Mode if you push the “input+ (default)”button before the setting is
effective
6)
The LED will show “0”“0” if the setting is success
The LED will show “F”“F” if the setting is failure