User manual

CONNECTING AND OPERATING THE 4X1 SWITCHER FOR HDMI 1.3

SWITCHING INPUTS ON THE 4X1 SWITCHER FOR HDMI 1.3

How to Connect the 4X1 Switcher For HDMI 1.3 to your devices

Connect the HDMI sources to the 4X1 Switcher for HDMI 1.3 input ports using the

supplied HDMI cables.

Connect the display (monitor or projector) to the 4X1 Switcher for HDMI 1.3 output

port using a user supplied cable.

Plug the 5V DC power supply into the 4X1 Switcher for HDMI 1.3.

Input switching on the 4X1 Switcher for HDMI 1.3 can be done using either the supplied IR

remote control, the selector buttons on the front panel, or by RS-232 serial control interface.

IR Remote

The supplied IR remote control is labeled with four buttons that correspond to the four inputs

on the 4X1 Switcher for HDMI 1.3. Pressing any of the four buttons will switch the 4X1

Switcher for HDMI 1.3 to that numbered input.

Selector Buttons

There are selector buttons on the front of the 4X1 Switcher for HDMI 1.3 for each of the

four inputs. Pressing any of these buttons will switch the 4X1 Switcher for HDMI 1.3 to the

corresponding numbered input.

RS-232 Serial Control Interface

Please see page 7 for more information on the RS-232 serial control interface.