User manual
6
IR CODE CONFIGURATION
4X1 Switcher For HDMI 1.3
Remote Channel 1:
Default
Remote Channel 4:
Remote
Remote Channel 1:
Default
1 2
Remote Channel 2:
1 2
Remote Channel 3:
1 2
Remote Channel 4:
1 2
How to Resolve IR Code Conicts
In the event that IR commands from other remote controls conict with the supplied
RMT-4IR remote control, changing the remote channel will alleviate this issue. The
RMT-4IR remote control and the 4X1 Switcher for HDMI 1.3 have DIP SWITCHES
for conguring the remote channel that both units use to communicate. These
settings must match each other for proper operation. The 2 DIP SWITCH bank on
the RMT-4IR is located underneath the battery cover. The 4 DIP SWITCH bank for
the 4X1 Switcher for HDMI 1.3 is located on the underside of the unit beneath a
black piece of metallic tape. DIP SWITCH 1 and 2 on the RMT-4IR correspond to
*DIP SWITCH 1 and 2 on the 4X1 Switcher for HDMI 1.3.
NOTE: *DIP SWITCHES 3 and 4 are not used on the 4X1 Switcher for HDMI 1.3.
1
1
2
2
3
3
4
4
Remote Channel 3:
1
2
3
4
Remote Channel 2:
1
2
3
4