User guide

HDMI 4x1 Selection Switcher User Guide 1
Introduction
Use the HDMI 4x1 selection switcher to allow multiple HDMI source devices to be
routed to a single, available HDMI input on a display. This can reduce the number of
HDMI cables required to run to the display. The switch can be controlled using the
front panel buttons, IR remote (included), or RS232 control.
The switch is a high performance HDMI device supporting resolutions up to 1920 x
1200 at 60 Hz, and 1080p. It supports EDID and DDC, and is HDCP and HDTV
compliant. It can be used in both residential and commercial applications to allow a
single available HDMI to view a variety of sources.
Features
• Supports Extended Display Identification Data (EDID) and Display Data Channel
(DDC)
• HDTV compatible with high definition transmission resolution up to 1920 x 1200 at
60 Hz (maximum), and 1080p.
• HDCP compliant, supporting DVI/HDMI 1.4a
• Built-in gain compensation technology
• Switching control from the front panel, RS232, and the IR remote
Package contents
• 1 x CM-SW4110-HD 4x1 HDMI selection switch
• 2 x removable mounting brackets
• 4 x screws
• 1 x IR remote control
• 1 x power adapter (5 VDC)
• 1 x RS232 cable
• 1 x user manual
Notes: Please verify that the product and all the accessories are included. If not,
contact your dealer.