Specifications

www.avenview.com
Page 8
3. INSTALLATION (SPLIT-HD42K-4)
To setup Avenview SPLIT-HD42K-4 please follow these steps for connecting to a device:
1. TPower off display sources such as DVD player, set-top box, PC etc.
2. Connect HDMI video Source to the video INPUT- ULTRA HD (3840x2160) or 1080p
3. Connect HDMI cable to HDMI Displays
4. Plug in 5V DC power cord to power jack of SPLIT-HD42K-4
5. Power on HDMI Source and ULTRA HD (3840x2160) or 1080p Display
6. When all Input and Outputs are connected and turned on the corresponding LED will light
4 GENERAL TROUBLESHOOTING
PROBLEM POSSIBLE SOLUTION
NO IMAGE
• Check if connection to the source and the display are correct.
• Ensure that display device supports 480p, 720p and 1080p 4K@24 resolution
• Please use the supplied power supply-DC 5V 1A
• Check LED light on Front Panel see (Section 3 Panel Description)
• Check LED Sync light see (Section 3 Panel Description)
5M OR LONGER HDMI
CABLE NO 4K2K IMAGE
• Ensure the HDMI Cable is 26 or 24 AWG High quality cable and supports Ultra
HD video and audio