Specifications

www.avenview.com

1.7 Installation

This product is composed of a Transmitter and a Receiver. The Transmitter should be connected to the

computer’s DVI Port and the Receiver should be connected the DVI Port of the digital display device. Avenview

FO-DVI-1000M-EMI Transmitter / Receiver is designed to be used with SC type standard optical cable

(Multi-Mode optical fiber: 50/125, 62.5/125um).

Avenview FO-DVI-1000M-EMI is can self-detect the EDID of the monitor and change the resolution

accordingly. Follow these steps for detecting EDID and connecting to a device:

1. Power on your Display

2. Connect Transmitter to the DVI of display

3. Plug the DC power of Transmitter

4. Check the LED light. If it turns off and then turns back on in a few seconds, it means that it has

finished reading the EDID of the display

5. Connect Transmitter to the DVI Source and Receiver to the Display.

6. Connect the optical fiber between Transmitter and Receiver.

7. Connect DC power to the Receiver

8. Restart the computer.