Specifications

www.avenview.com|5
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview DVI-VIDEOWALL-12X Dual image Videowall Processors has great Processing Power, for the most
cost effective, and full real time data for multiple flat panel displays or projectors. DVI-VIDEOWALL-12X can
support up to 12 DVI outputs to expand the spectrum of video wall applications. This new concept of having
Modular output cards and the ability to Cascade to another unit,
Users can therefore adjust the number of output ports based on different scenarios.
The 4.95Gbps bandwidth of video, the controllability of the module, and the input complexity can be useful to
either be cost effective on project overheads or enhance the design with the new features from the new I/O
cards. Designed with Thru DVI transmission, the quality of the output video is guaranteed. The output display
is up to 255 by 255 squares. With its user friendly software included any display layout can be achieved.
DVI-VIDEOWALL-12X allows you to manipulate two input videos, to any positions and whatever size you want
for viewing. The embedded Scaler converts signals from two of the input sources to match the native
resolution of monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA
(1920x1200). The DVI-VIDEOWALL-12X sends the resulting mixed video thru DVI interface to the connected
monitors/projectors based on the display layout. The layout can be readily modified to fit your applications
and optimize visual effects. Typical applications include digital signage, and broadcasting/education/
surveillance systems etc.
 PCIe interface add-on card design
 Up to 12 DVI outputs from 640x480 to 1920x1200 with a local loop out for monitoring
 Supports HDMI, DVI, S-Video, Composite, Component, and VGA input, from 640x480 to 1920x1200, interlaced or
progressive
 Advanced video de-interlacer for improving 480i and 576i SD video input
 PIP, PAB, Full screen modes and adjustable size & position through software
 Resize, position, flip, zoom output video
 Perfectly as a video screen splitter, a video converter and a video switcher
 Each DVI output has an independent controllable display area
 User-selectable output settings, up to 1920x1200
 Can be cascaded to obtain more displays
 Image parameters and layouts are automatically saved in flash memory of the device and can be recalled for
later use
 Several Image parameters and layouts can be saved in computers and can be loaded for later use
 Software control through RS-232 / RS-485
 Built-in long distance RS-232 control port over Cat-5e
 Firmware upgradable for support of new features and technology enhancements
 Built-in factory reset switch
 2.5RU size
 Optional Ethernet control card support