Specifications

www.avenview.com
9
Switch Position
1
OFF  (Normal Operation)
ON  (Reset)
2
OFF  (Normal Operation)
ON  (Reset)
1.8 Installation
To setup Avenview C-SC-UNI follow these steps for connecting to a device:
1. Connect your Video sources to Input connectors
2. Connect your VGA, DVI, HDMI enabled monitors to DVI-I Output connector
3. Plug in 5V DC power cord to power jack of C-SC-UNI
4. Use IR Remote to select the input, setup the output resolution and adjust your video format
a. PIP and PAP only support digital and analog display or dual display for single input.
b. Analog stereo audio can merely support 2-channel audio. This version does NOT support
8-channel analog audio applications.
c. S/PDIF audio input can support 2 out of 8-channel audio input.
d. S/PDIF supports only 48KHz audio sample rate.