Specifications

www.avenview.com

1.7.3 HDM3D-C5SW-R

1. IR Receiver: Plug in IR receiver

2. 5V DC Power jack

3. HDMI Signal Input: Plug in CAT 5/6

4. IR signal: Plug in the CAT5/6 connected

from the respective IR signal port on the

SW-HDM3D-C5-8X8.

5. IN Put Channel: Displays the current

HDMI Source

6. Input Select: Push button for switch

Input source channel in sequential order

7. Signal Level 0 – 7: Adjust the 8-level

equalization control to the received

HDMI signals.

8. HDMI Output: Connect HDMI cable to

HDMI Display

EQ Level (Signal Level 0 – 7)

Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies from 0

(strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance.

Please adjust the signal level from 7 to 0 and stop turning the rotary switch whenever the audio/video is

playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the

product life significantly!