Specifications

www.avenview.com|7
1.8 EDID Learning
1. Power off the HDM3D-C5SP-8 and Display. Connect to HDMI OUTPUT with a HDMI Cable to the display you
want the HDM3D-C5SP-8 to learn its EDID.
2. Set the mode to position”7”on the HDM3D-C5SP-8 2.
3. Power on the HDM3D-C5SP-8 and the Display - wait for about 6-8 seconds to complete the EDID learning
process;
NOTE: Not necessary to power cycle again or even twice while plugging on different displays.
1.9 Installation
To setup Avenview HDM3D-C5SP-8 follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect to a HDMI source (such as a Blu-Ray Disc player) to HDMI Input of HDM3D-C5SP-8
3. Connect the receiver HDM-C53X-R or HDM-C5-R-M to HDM3D-C5SP-8 from RJ45 Out with CAT5 /
CAT6 cable
4. Plug in 5V 4A DC Power (supplied).
5. Power on the HDMI display
6. Power on HDMI Sources.