Specifications

www.avenview.com
Page 10
6. INSTALLATION (HBT-C6POE-SET)
To setup Avenview HBT-C6POE-SET please follow these steps for connecting to a device:
- Turn off all devices including monitors / TV
- .Connect to a HDMI source (such as a Blu-Ray Disc player) to the Transmitter HBT-C6POE-S/SP4/8 or Matrix 4x4/8x8
- Connect HBT-C6POE-R 100m or HBT-C6POE-RL 60m with a CAT5/6/7 cable with shielded ends, then connect to
display with HDMI cable.
- Plug in Power for the Tx.
- Plug in the IR BLASTER: into IR BLASTER in this case and the blinker on the IR eye (Source)
- Plug in the IR Extender to IR EXTENDER in this case to receive IR Signals from Remote
- Power on the HDMI display
- Power on HDMI Sources.
NOTE:The QUALITY and TRANSMISSION of the video signals depends on the characteristics and quality of the
UTP cables. Higher resolutions and longer transmission distances require low skew cables (<25ns/100m) for
best performance.
Unshielded CAT6 with metal RJ-45 connectors is recommended.