AV Connectivity, Distribution And Beyond... VIDEO WALLS VIDEO PROCESSORS VIDEO MATRIX SWITCHES EXTENDERS SPLITTERS WIRELESS CABLES & ACCESSORIES HDBaseT HDMI CAT5/6/7Extender with POE/LAN/RS-232/ Bi-directional IR Model #: HBT-C6POE-SET © 2013 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products.
Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.
TABLE OF CONTENTS 1. GETTING STARTED...........................................................................................................................1 1.1 Important Safeguards...............................................................................................................1 1.2 Safety Instructions...................................................................................................................1 1.3 Regulatory Notices Federal Communications Commission (FCC)..........
1. GETTING STARTED SECTION 1: GETTING STARTED 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover •• Any product, on which the serial number has been defaced, modified or removed.
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. Warning symbols Description ONLY USE THE PROVIDED POWER CABLE OR POWER ADAPTER SUPPLIED. DO NOT TAMPER WITH THE ELECTRICAL PARTS.
2. Introduction The Avenview HBT-C6POE-SET HDBaseT Extender set CAT5/6/7 with POE, Bi-Directional IR, RS232 and Ethernet has been designed to extend High Definition video and multi-channel digital audio formats to any HD Monitor. Video Signals: 4K2K@30 (Ultra HD), 3D, 8/10/12 Deep Color, and Full HD 1080p@60 Hz/36-bit color depth. Audio signals: Lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD). Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz over CAT5/6.
2.1 Package Contents Before you start the installation of the converter, please check the package contents. HBT-C6POE-SET Includes 1 HBT-C6POE-S (TX) HBT-C6POE-R (RX) Power Adapter (24V/1.25A DC) X1 IR Extender X1 IR Blaster X1 User’s Manual X1 2 www.avenview.
2.2 Before Installation •• Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. •• Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. •• Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. •• Do not twist or pull by force ends of the optical cable. It can cause malfunction. 2.
3. APPLICATION DIGRAM www.avenview.
4. Panel Description 4.1 INPUT PANEL (Transmitter, HBT-C6POE-S) Front 1 3 2 1. HDMI IN: Connect 2. LAN Connect to a router for LAN sharing. This allows network/internet HDMI source Max 35ft access) to be shared over the CATx to the RX. via HDMI Cable Blu-ray Warning: DO NOT connect the LAN connection to the CAT5e/6/7 output, player or Digital player this may trigger a power shut down and may damage the device. 3.
4.3 INPUT PANEL (Receiver, HBT-C6POE-R) Front 10 11 12 10. HDMI OUT: Connect 11. LAN OUT: Connect to a LAN equipped device (such as a smart to HDMI display Max TV or games console) to share the network/internet access. 35ft via HDMI Cable or Warning: DO NOT connect the LAN connection to the CAT5e/6/7 output, cascade with another this may trigger a power shut down and may damage the device. Avenview type Transmitter 12.
5. IR CABLE DEFINITION Power 5V IR Blaster Signal NC IR Signal Power V Grounding IR Sockets IR BLASTER: plug in the IR blaster to the HBT-C6POE-R to emit all IR command signals received from the IR Extender plugged into the TX. IR1 Blaster on TX receives IR from IR1 Extender on RX. IR2 Blaster on RX receives IR from IR2 Extender on TX. to control the devices corresponding to the IR signals. Example: Set Top Box or DVD player (The Source).
6. INSTALLATION (HBT-C6POE-SET) To setup Avenview HBT-C6POE-SET please follow these steps for connecting to a device: -- Turn off all devices including monitors / TV -- .Connect to a HDMI source (such as a Blu-Ray Disc player) to the Transmitter HBT-C6POE-S/SP4/8 or Matrix 4x4/8x8 -- Connect HBT-C6POE-R 100m or HBT-C6POE-RL 60m with a CAT5/6/7 cable with shielded ends, then connect to display with HDMI cable. -- Plug in Power for the Tx.
HBTC6POE-S HDM-SWITCHPRO-VW4 PIN Assignment 1 NC 2 TxD 3 RxD 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC Remote RemoteController(PC) Controller(PC) è ç PIN 1 2 3 4 5 6 7 8 9 www.avenview.
7. General Troubleshooting Problem Possible Solution 1. Check if connection to the source and the display are correct. 2. Ensure that display device supports 480p, 720p and 1080p 4K@30 resolution NO IMAGE 3. Terminated to 568B standard with Shielded Ends Recommended 4. High Quality CAT5/6/7 Cable helps signal transmission 5. Please use the supplied power supply-DC 24V 1.25A 6. Check LED Link light see (Section 4 Panel Description) 7. Check LED Sync light see (Section 4 Panel Description) 8.
8. Specifications Item UNITS UNIT DESCRIPTION Description HBT-C6POE-S HBT-C6POE-R HDBaseT HDMI Transmitter HDBaseT HDMI Receiver HDCP YES ETHERNET SPEED 100Mbps VIDEO BANDWIDTH SUPPORTED RESOLUTIONS Single-link 300MHz [9Gbps] 480i~1080p@50/60, 1080p@24, 3D 4K@30 Up to Ultra HD (3840x2160@24/25/30Hz) CEC SUPPORT CAT5/6/7 CABLE AUDIO SUPPORT ALLOWS CEC BYPASS 4K2K: (3840X2160@30Hz) ~ 70meter (229feet) (CAT6e) FULL HD: (1080p) ~ 100meter (330feet) (CAT6e/6A) LPCM 7.
Notes www.avenview.
Notes www.avenview.
Avenview Warranty Certificate AVENVIEW CORP. (“Avenview”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.
AV Connectivity, Distribution And Beyond... TECHNICAL SUPPORT USA Head Office Avenview Corp. 275 Woodward Avenue Kenmore, NY 14217 Phone: 1.716.218.4100 Fax: 1.866.387.8764 Email: info@avenview.com Canada Sales Avenview 151 Esna Park Drive, Units 11 & 12 Markham, ON, L3R 3B1 Phone: 1.905.907.0525 Fax: 1.866.387.8764 Email: info@avenview.com Avenview Europe Avenview Europe Demkaweg 11 3555 HW Utrecht Netherlands Phone: +31(0)85.2100.613 Email: info@avenview.eu Avenview Hong Kong Unit 8, 6/F.