AV Connectivity, Distribution And Beyond... VIDEO WALLS VIDEO PROCESSORS VIDEO MATRIX SWITCHES EXTENDERS SPLITTERS WIRELESS CABLES & ACCESSORIES HDBaseT Lite HDMI CAT5/6/7Extender with POE/RS-232/ Bi-directional IR Model #: HBT-C6PLT-R © 2013 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products.
Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.
TABLE OF CONTENTS 1. GETTING STARTED...........................................................................................................................1 1.1 Important Safeguards...............................................................................................................1 1.2 Safety Instructions...................................................................................................................1 1.3 Regulatory Notices Federal Communications Commission (FCC)..........
1. GETTING STARTED SECTION 1: GETTING STARTED 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover •• Any product, on which the serial number has been defaced, modified or removed.
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. Warning symbols Description ONLY USE THE PROVIDED POWER CABLE OR POWER ADAPTER SUPPLIED. DO NOT TAMPER WITH THE ELECTRICAL PARTS.
2. Introduction The Avenview HBT-C6PLT-R HDBaseT Lite Receiver CAT5/6/7 with POE, Bi-Directional IR and Ethernet has been designed to extend High Definition video and multi-channel digital audio formats to any HD Monitor. Video Signals: 4K2K@30 (Ultra HD), 3D, Deep Color, and Full HD 1080p 36-bit color depth. Audio signals: Lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD). Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz over CAT5/6.
2.1 PACKAGE CONTENTS 1 HBT-C6PLT-R X1 IR Extender X1 IR Blaster X1 User’s Manual X1 www.avenview.
2.2 BEFORE INSTALLATION •• Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. •• Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. •• Use the DC power adapter with correct specifications and supplied with the unit. If improper power supply is used the unit may malfunction and cause a fire. •• Do not twist or pull by force ends of the UTP cable. It can cause malfunction. 2.
3. APPLICATION DIAGRAM www.avenview.
4. Panel Description INPUT PANEL (Receiver, HBT-C6PLT-R) Front 1 2 3 4 1. HDMI OUT: Connect to HDMI display Max 35ft via HDMI Cable or cascade with another Avenview type Transmitter 2. IR 2 Blaster: Plug the IR Blaster cable for IR signal being transmitted. Place IR Blaster within direct site of the device being controlled. 3. RS-232: Connect to a device that has the ability to Receive control commands via RS232 only with compatible Transmitters. 4.
5. IR CABLE DEFINITIO IR Sockets -- IR BLASTER: plug in the IR blaster to the HBT-C6PLT-R to emit all IR command signals received from the IR Extender plugged into the Rx (Monitor Side) to control the devices corresponding to the IR signals. Example: Set Top Box or DVD player (The Source). -- IR EXTENDER: plug in the IR Extender into the (RX) Receiver (Monitor Side) to receive all IR command signals from the IR remote controls of the corresponding source.
6. INSTALLATION (HBT-C6PLT-R) To setup Avenview HBT-C6PLT-R please follow these steps for connecting to a device: 1. Turn off all devices including monitors / TV 2. Connect to a HDMI source (such as a Blu-Ray Disc player) to the Transmitter HBT-C6POE-SP4/8 or Matrix 4x4/8x8 3. Connect HBT-C6PLT-R 60m or HBT-C6POE-R 100m with a CAT5/6/7 cable with shielded ends, then connect to display with HDMI cable. 4. Plug in Power for the Tx. 5.
7. GENERAL TROUBLESHOOTING PROBLEM POSSIBLE SOLUTION •• Check if connection to the source and the display are correct. •• Ensure that display device supports 480p, 720p and 1080p 4K@30 resolution •• Terminated to 568B standard with Shielded Ends Recommended •• High Quality CAT5/6/7 Cable helps signal transmission NO IMAGE •• Please use the supplied power supply-DC 24V 2.
8.
Notice -- All HDMI over CAT5 transmission distances are measured using Belden CAT6A (625MHz), 4-Pair, U/UTPUnshielded, Riser-CMR, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Patented Double-H spline, Ripcord, PVC Jacket using Quantum 980 signal HDMI Video Generator Module Video Pattern Testing. -- 2. The transmission length is largely affected by the type of category cables, also the type of HDMI sources, and the type of HDMI display.
Notes www.avenview.
Avenview Warranty Certificate AVENVIEW CORP. (“Avenview”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.
AV Connectivity, Distribution And Beyond... TECHNICAL SUPPORT USA Head Office Office Avenview Corp. 275 Woodward Avenue Kenmore, NY 14217 Phone: +1.716.218.4100 ext223 Fax: +1.866.387-8764 Email: info@avenview.com Canada Sales Avenview 151 Esna Park Drive, Unit 11 & 12 Markham, Ontario, L3R 3B1 Phone: 1.905.907.0525 Fax: 1.866.387.8764 Email: info@avenview.com Avenview Europe Avenview Europe Demkaweg 11 3555 HW Utrecht Netherlands Phone: +31 (0)85 2100- 613 Email: info@avenview.
