Specifications

www.avenview.com
Page 6
5. SPECIFICATIONS
Item Description
UNIT FO-MMD-SC-SC-XX
UNIT DESCRIPTION
50/125µm Fiber Optic Patch Multimode Simplex SC to SC 10Gb OM3
Aqua -XX (XXft)
CLAD DIAMETER 125um
CORE DIAMETER 50um
FIBER TYPE 50/125-OM3
NO. OF FIBERS 2
APPLICATION Transportation of data over 10 Gigabit Fiber network/Duplex Fiber Extenders
CABLE TYPE 10Gigabit AQUA Multimode 50/125 fiber optic
CABLE LENGHT 3M,5,10,15,20,25,30,40,50,75-100M
COLOR Aqua
STYLE FIBER OPTIC
LASER LIGHT LED and VCSEL
CONNECTORS SC Connector Male 2.5 mm ferrule
NO OF CONNECTORS 4
OPTICAL FIBER HAZARD
- Persons installing fiber optic products must take all necessary safety precautions, such as wearing protective clothing and
goggles and observing warning signs.
- To ensure that the required personnel and equipment is properly installed, secure from unnecessary failure of the
components or failure of the whole system, injury to one’s self and in addition to legal responsibility; everyone is
responsible for his own health
- Keep exposed optical fiber ends away from skin and eyes.
- The waste fragments should be treated with care and not picked up with bare hands, but rather with special gloves.
- Dispose of waste in a suitable container via an approved agency. Make sure that the quantity of optical fiber waste is
minimized.
- Closures containing termination points for optical fiber cabling must be labeled with appropriate warning signs or clearly
visible text.
- Make sure that the quantity of optical fiber waste is minimized. Closures containing termination points for optical fiber
cabling must be labeled with appropriate warning signs or a clearly viewable text.
- There are four Laser Classifications based on risk levels. Laser manufacturers are required to label their lasers accordingly.