Specifications

www.avenview.com

1.8 Installation

To setup Avenview HDM-C5SP-8SR follow these steps for connecting to a device:

1. Connect Cat-5e cable if using any Cat-5e HDMI video transmitter as cascading source

2. Connect HDMI input to HDMI compliant sources (such as a Blu-ray Disc player)

3. Connect all HDMI outputs to the HDMI displays

4. Connect RJ-45 output to HDMI over CAT5 receiver through Cat-5e cable

5. Plug in 5V 4A DC power supply.

6. Power on the HDM-C5SP-8SR

7. Power on the HDMI displays.

8. Power on the HDMI source(s)

1.9 PIN & Wiring Standard Definition