Product Card

24
How the HEMOTAG System Works
The complete HEMOTAG Cardiopulmonary Assessment System (CPAS),
as shown on page 5, consists of components to record and collect
your Heart Sounds and ECG data. The Device includes software that
communicates over an encrypted Bluetooth link with a smartphone App
to transmit data over an SSL link to a secure HIPAA compliant web-
dashboard for storage analysis and reporting. The data is available to be
accessed and reviewed by your health care professionals.
The HEMOTAG measures the heart rate in beats/minute, by dividing 60
with the calculated average RR duration from the 30second 1-lead ECG
signal.
The HEMOTAG System can be operated by either a healthcare
professional or the patient.
Cleaning the HEMOTAG Device
Servicing/Maintenance
Cleaning & Storing the Device
If you see visible dirt on the HEMOTAG Device: Use a sterile 70% isopropyl
alcohol (IPA) pad and thoroughly wipe in a circular motion, for a minimum
of 30 seconds, all outer surfaces of the HEMOTAG Device. Ensure excess
alcohol does not run into or collect in seams or crevices. Allow the Device
to air dry. If visible soil remains, repeat the above steps using a new,
sterile IPA pad until the HEMOTAG Device is visibly clean.
If using same HEMOTAG on multiple patients clean/disinfect between
uses.
No operator maintenance is required. If device requires servicing or
maintenance contact aventusoft LLC at the info provided on page 2 of
these instructions.