Installation guide

VENDOM

7. Vendoma System Assembly

7-1. Front Views

1. Cooling fan

This fan removes the excessive heat generated in the system and enhances the system’s stability.

2. HDD LED

When your hard disk drives (HDDs) are running, this light either blinks or remains steady).

3. Power LED

This light is on when your system is powered on.

4. 3 ½” Floppy Drive (Optional)

5. CD-ROM or DVD-ROM

6. Reset switch

7. Power switch

Push this button to power on the DVR. For normal operation, this switch should be used instead

of the main power switch on the back of the DVR.

Attention: Please do not use this power switch to stop the DVR Program. If you power off the

DVR while it DVR Main is running, the current data and previously saved data may be damaged.

Please follow the accepted directions for stopping the DVR program in the User Guide.