Installation guide

VENDOM

6. RS232 TO RS422/485 Converter

This is the converter for controlling the Pan/Tilt/Zoom camera.

1. Connect the cable to computer serial Port.

2. You can select one of three Power connectors:

- 1 : Power from Capture Board (+5V) 1

- 2 : Power from System Power Supply 2

- 3 : Power from System Power Supply 3

3. Connect data line from camera to this port.

4. Set the jumper switch for an RS-422 type Pan/Tilt/Zoom camera

If you have an RS232 type Pan/Tilt/Zoom camera, connect the cable directly to the RS232 port.