Installation guide

VENDOM
A
DV
R
t
7 MPG 24008-1 & MPG 24008-2
Hook up TV-OUT Loop
Assembly View
1. After connecting the Watchdog cable, the other end of the cable must be plugged in to the
Reset pin of the PC’s motherboard. The Reset switch from the PC must be plugged in next to
the Watchdog on the DVR card.
2. If the Watchdog cable and/or the Reset switch are connected incorrectly, the system will not
reboot and you may not have video. Try reconnecting the pins to restore the video.
19