User Guide

Check that all pump parts have been
assembled correctly and that the valve
is positioned correctly.
Ensure that the silicone diaphragm and
Let-down Massage Cushion™ are fitted securely
to the pump body and a perfect seal is created.
Make certain that the control handle is firmly
in place.
Ensure the pump is correctly assembled and that
suction is being created.
Relax and try again, as expression may improve
after practice.
Refer to the ‘Hints to help you succeed’ section
on page 14.
You may be squeezing too hard. You do not need
to use all the suction the pump can generate.
Try squeezing the handle more gently and
remember the 2-3 second pumping rhythm.
Consult your health professional/breastfeeding
adviser.
Remove and re-fit the Let-down Massage Cushion
to ensure it is firmly attached and pushed far
enough down the centre of the funnel.
Try leaning slightly forward.
Lack of suction
No milk being
expressed
Pain when
expressing
Milk is drawn up the
Let-down Massage
Cushion
CONCERN SOLUTION
Troubleshooting guide
19