Use and Care Manual

Test Report
No.: SHHL1909051579IF Date: NOV. 25, 2019 Page: 18 of 19
Result 1
Mechanical strength of the membrane of a swimming pool with tubular frame and/or flexible
structure
Adhesion Strength
(EN ISO 2411:2017;)
N/A= Not Applicable, The Specimen Could Not Be Peel Off Separately
Tearing Strength
(EN ISO 4674-2:1998; Elmendorf)
- Unit
(A) Requirement
Warp Yarns Torn daN >12.8 10daN
Weft Yarns Torn
daN
6.1
5daN
Tensile Strength
(EN ISO 1421:2016, Method 1;
Strip method)
- Unit
(A) Requirement
Warp daN/50mm 175.0 100daN/50mm
Weft
daN/50mm
120.8
100daN/50mm
Since the data and / or information above division line of front page is provided by the applicant, the
relevant results or conclusions of this report are only made for these data and / or information, SGS
is not responsible for the authenticity, integrity and results of the data and information and / or the
validity of the conclusion. Testing results only apply to the sample as received.
The declaration of conformity is only based on the actual value of laboratory activity, measurement
uncertainty of the results not take into account.