Getting Started Guide

-12-
Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe
consequences!
3.3 Powering On/Off the Mobile Phone
Hold the End key for a while to power on the mobile phone. A power-on animation appears on the display
screen.
Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is
provided by the network operator for new opening SIM card.
Press and hold the end button and then jump out of the interface and select the option to turn off the
phone.
3.4 Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile phone automatically
searches for an available network. After finding a network, the mobile phone enters the standby state. When
the mobile phone is registered in the network, the name of the network operator is displayed on the screen.
Then you can dial or receive a call.
3.5 Dialing Calls
In the standby interface, press number keys to input the area code and the telephone number, and then
press the Dial key to dial a call. To end the call, press the End key.
 Dialing an international call
Press two times the numeric * key to input "+". Then input the country code, the area code and the
telephone number. Finally, press the Dial key.