User manual

Installation and User Manual ADPRO FastTrace-R by Xtralis
80 Doc 13972_03
4.3.12 Alarm Inputs
The Alarm Inputs option defines a number of parameters about the type and operation of the
alarm inputs connected to the FastTrace-R. The number of alarm inputs available will depend on
the FastTrace-R Model number.
Select the Alarm Input number from the displayed list. The status of an Alarm Input is shown by a
small icon to the left of the channel number.
• An Alarm Input is unallocated when no name is shown next to the number.
Figure 78: Unallocated Icon
•The Connect button is used to enable an Alarm Input. A green tick is shown and details can
be modified.
• To temporarily disable the use of an Alarm Input, the Disconnect button is used and a red
cross is shown. For example, set Disconnect if maintenance is being performed in that area
or the sensor is being replaced.
Figure 79: Alarm Contacts List
Alarm Input Settings
When the Configure button is used, changes to the Alarm Input Settings can be made.
Alarm Input Name
Option: 16 characters maximum.
Enter the name to be associated with this Alarm Input.